Fishman Fluence Question for Owners

Discussion in 'Pickups, Electronics & General Tech' started by patdavidmusic, Aug 16, 2017.

  1. patdavidmusic

    patdavidmusic SS.org Regular

    Messages:
    268
    Likes Received:
    63
    Joined:
    Mar 10, 2014
    Location:
    Australia
    I have a set of the Fluence Tosin six string pick ups on the way, I am beyond excited!
    I just wanted to know, is it possible to mix voices within one five way blade.

    For example:

    Position
    1 Neck Voice 2
    2 Neck voice 3
    3 Neck and bridge voice 3
    4 Bridge voice 3
    5 Bridge voice 2

    And if so could you then have a push pull that would change voice 2 to voice 1?

    Thank you for your time!

    Pat
     
  2. Stuck_in_a_dream

    Stuck_in_a_dream SS.org Regular

    Messages:
    1,370
    Likes Received:
    422
    Joined:
    Apr 6, 2011
    Location:
    Austin, TX
    I believe Tosin's wiring in his new sig (the multiscale model) has something similar to what you're suggesting. It can probably be done with a super switch. I have Fluence Modern-7's wired in a 5-way (neck hum, neck single, both hum, both single, hum) with vol-vol-tone, push/pull vols for voicings.

    I also recently got the Tosin 8's, KSE-6. I had them wired w/ a 3-way (neck, both, bridge), with vol-vol & push-pull for voicings, and a toggle switch for hum/single. This way I can mix/match all I want. Both are phenomenal pickups, but the Tosin's are much hotter though.
     
  3. patdavidmusic

    patdavidmusic SS.org Regular

    Messages:
    268
    Likes Received:
    63
    Joined:
    Mar 10, 2014
    Location:
    Australia

    Fantastic thanks for your help!
    So excited!
     

Share This Page