Another help me with my pedal order thread

[leftnotright]

OK so my 5yr old did a number on my pedal board and moved stuff and unplugged.

SOO, now is the time i come to consult the experts on here as to how i should setup the pedal board correctly. NOt sure i ever had it correct in the first place. I play just about 100% metal.

This is going to a powerball v1 amp w/fx loop send/recieve.

SO for the fx loop, i have the from send to phaser>reverb>delay, is that correct?

now for the front.

Do i go tuner>wah>ODrive>noise suppressor ns2. Gawd, and which goes into what end.

UGH.

Thanks for ANY help!

By the way, the pic below, ignore the cables, i just have it working enuff to make noise at the moment. I know its not right.

 

[TheWarAgainstTime]

The phaser can work equally as well in the FX loop as it can out front, just a different flavor. Experiment to see which you like better. As for the rest...

In front of the amp, I'd go tuner->wah->maybe the phaser->overdrive->gate

In the FX loop I'd go maybe phaser->delay->reverb

Placing the reverb after the delay will give you the most natural sounding trails since the sound of the start of the reverb signal isn't being repeated with the delay.

 

[rexbinary]

The phaser can work equally as well in the FX loop as it can out front, just a different flavor. Experiment to see which you like better. As for the rest...

In front of the amp, I'd go tuner->wah->maybe the phaser->overdrive->gate

In the FX loop I'd go maybe phaser->delay->reverb

Placing the reverb after the delay will give you the most natural sounding trails since the sound of the start of the reverb signal isn't being repeated with the delay.

Nailed it IMO.

 

[leftnotright]

Thanks guys, I will give it a shot.