Search results

I've been chipping away at this little by little here and there on the weekends since early 21. It's a for me. Padauk top, ash body, katalox and P.H. neck/ F.B. Scale lengths will be 26.5 x 24.75, fret zero being square.

In 2019 I was professionally diagnosed as having bone spurs in the CMC joints at, pretty much the base of my thumbs, left and right hands. One option was steroid shots into the actual joints, which lasted for about a month. I can get the surgery but don't want to take the...

Sounds good Randy, have you checked out coolant misters? They can blow out the chips and deliver coolant at the same time, if you have an air compressor. https://www.amazon.com/dp/B07SBVZMMY/?tag=sevenstringorg-20

Spray a little WD40 into the cut for lube, if you havn't tried some other form of coolant.

I made the router last year, also got around to finishing this guitar, all pics are in my basement practise space etc.

I had limit switch problems too. They kept re-setting my Mega 2560 when trying to home. Turns out that since I was duplicating the original/fully functional way my 3d printer is wired up, loaded with Makerbot limit switches, the Makerbot limit switches somehow have a different wiring...

Similar, I'v had issues with using the exact same Marlin firmware on one manufacturers Mega 2560 to another manufacturers version. Supposed to be the same...

I'v actually had a full bran new set of A4988 drivers be completely faulty / overheat and fry. I made sure to properly set the current limit before use on my Wade extruder. Swapped it out with an A4988 from a different set and it worked great. The faulty A4988 also fried the voltage regulator...

I still have my 8200 from 1996. It has been to the repair shop a time or two for a faulty cap replacement and I installed one of those groove tubes in like early 2000's which was cool. Yeah I forget how cool that thing is and get surprised when I plug it in every few years. Cool to hear about...

I have a long time friend who has become a massive coffee snob over the last 5 or so years, with the precision burr grinder and high end espresso machine, trying different roasters from all over. Though I myself don't take it to those levels, he has talked me into getting a 'pour over' which...

Allways enjoyed this jam

What is your print bed size?

Not exactly a direct musician comparison, but he probably acted as one at some point. I was driving and this couple sped up next to me on a 2 lane road, flagged me down and had me pull over. I rolled down my window, they were both looking at me with big convinced smiles and one of them said "Tom...

Rick Toone might be interested, send him a pic.