Brief & Accurate Description of gear/guitar: Strandberg Boden OS6, limited purple gloss run with a flame maple top. This is the trem model, with the bearing trem. Guitar is in perfect condition, lightly used, ready to play. Stainless frets, zero fret was professionally lowered and crowned (the OS models suffer from a slightly high 0 fret that does not allow a nice first fret action). No zero fret issues (pinging, excessive wear etc.). This model comes with the newer nut with proper string slots (not the first ebony one that had just wide cuts). Also with proper string slot depths (crucial if you don't want 0 fret wear). Frets are nice and level, 1-1.5mm action. Beautifully figured birdseye on the fretboard. Setup with 10-52 Elixir strings, half step down. While this is the best trem I used, I find that I go for my second non trem Strandberg most of the time so I want to buy another non trem one. I take care of my instruments and I've been working on guitars for many years. I will answer any questions - feel free to PM or email me. Modifications (if any): -Installed a set of EMG X pickups, 81X in the bridge and a EMG HX in the neck (single coil in a humbucker housing). 3 way switch is also a pro EMG switch. I also have the original pickups, I will include them with the guitar, or I can sell cheaper without the EMGs (soldering the old electronics back however would be on the buyers side). -Installed flush mounted straplocks (Dunlop) - no strap buttons sticking out! -Installed 2 stiffer springs instead of 3 springs - a nicer, less stiff trem action -modified trem arm - lowered slightly closer to the strings (to match a Ibanez Edge), zero play in the arm -installed stainless steel nut locking screws (the tiny m2 screws, they are not stainless originally) -covered trem mounting screws (no silver philips screw heads showing) Accessories (hardshell case etc): Beautiful hard gigback Slickbag - Made in Sweden Location (City,State or City,Country): POLAND International OK? : YES, Europe Contact Info (No Phone #s) PM here on forum or email - cubix.the(at)gmail.com References (eBay or other forum userid): cubix.the on ebay, www.poltergeistworks.pl (my work) Price (include currency and if firm/obo): 1900 Euro or 1700 Euro without EMGs (+ shipping) Pictures: I can email more photos in higher quality, will add more pics when I'll have access to my DSLR.