Separate names with a comma.
Discussion in 'Gear & Equipment' started by Michael, Feb 17, 2008.
Just wanted to post a new picture of my re-done pedalboard
no pics yet (I will get some Thursday)
But im super happy with my final rig.
Randall T2 powering > Rack Kemper > 4x12 (V30 +k100 x-pattern)
I tone matched Whitechapel's last 2 albums guitar tone. (Im a big fan of their latest twang sound. I know its love it or hate it though)
It sounds amazing. Super super happy with the Randall + Kemper + 4x12 combo. Amazing tones.
Excuse crappy cellphone pics -
Furman power conditioner
Line 6 G10
Randall T2 for power
4x12 cab with v30 + K100s
Next step will be put it all inside a live in touring case.
I recently did a concert as a musical director for a gospel band. But I was also playing both guitar and keyboards. As there was no backing track used, I had to figure out a way to be able to multi-task a la Geddy Lee style. So became the biggest rig I ever assembled:
Ibanez Guitars (w/Dimarzio Pickups)
RG1550M (Drop D)
RG550 (E Standard)
RG620X (E Standard w/piezo acoustic pickup)
RG1527 (B Standard)
Free The Tone Junction Box
Piezo Acousitc Guitar
FTT Junction Box
Fishman DI to FOH
FTT Flight Time Delay 2 in Loop
FTT Junction Box
FTT Final Booster
Morley AB Switch > Split to Main Guitar and Guitar Synth
Morley AB Switch (B)
Boss SY300 Guitar Synth
Earthquaker Devices Bit Commander
EQD Rainbow Machine
FTT Junction Box to FOH
Morley AB Switch (A)
FTT Junction Box 2
Real McCoy Custom Wizard Wah
Digitech Whammy DT
FTT Arc 53M Loop Switch System
FTT Junction Box 2 to Amp
Arc 53M Loops
Tuner: TC Electronic Polytune 2
Loop 1: FTT Silky Comp > FTT Red Jasper Overdrive (clean sounds)
Loop 2: FTT Gigs Boson (mid gain/solo boost)
Loop 3: FTT Heat Blaster (high gain)
Loop 4: Eventide Pitch Factor > Eventide Modfactor
Loop 5: Eventide Timefactor > Strymon Bigsky Reverb
EVH 5150 III 50w Head > EVH 5150 III 2x12 Cab (Green channel only)
Yamaha MX61 > FOH
Roland PK5 Midi Foot Controller
Korg MicroKorg Synth > FOH
Keith McMillen Midi Box > KM 12 Step Foot Midi Foot Controller
@Bloody_Inferno awesome, are there any sounds/vids to share?
I probably should've made one on the night considering it surprisingly didn't take long to set up (the keyboards took longer than the pedals). But unfortunately it totally didn't cross my mind. I still haven't disassembled the rig so I might chuck some 1 min sound runs on IG or something.
Here is my modest home set-up.
Zilla Dinky Cab w/ V30 speaker.
No pedals (yet - I have no idea what to look for).
Can't believe I haven't posted anything in this thread yet! Anyways, here's the current setup. Well, almost.. the BB preamp is replaced by Precision Drive these days:
Underneath the board is a Voodoo Lab Control Switcher which converts the MIDI from the EFX Lite to relay commands for the EVH. On the side there's an Audio Technica wireless receiver. When setting up, I just take the front & back lids off and plug in all the cables. The Mesa sounds awesome, I prefer it to the EVH cab in tight modern metal riffing.
Some stuff that's been in and out of the board:
I just finished up my new pedalboard (for now) and just want to show it off.
Signal path is:
Guitar > TU-2 > NS-2 > Electro Harmonix Mel9 > TS-9 > EHX Russian Muff > Abominable Electronics Throne Torcher (HM-2 clone) > Earthquaker Devices Acapulco Gold > TCE Flashback X4 > TCE Hall of Fame 2 > Amp (EHX Mig50)
In the semi-near future I may mod the TS-9 to 808 specs, as well as make a small patchbay so I can easily switch from an in-line setup for when I'm playing my amp without an FX loop, to a setup that will send the Acapulco gold to the front of the amp and the delay and verb to the FX loop of my amp that has one.
I'm also going to probably switch all of the cables to the small pancake style jacks to save some space.
Recent acquisition! A dream came through! Guitar > Korg Pitch Black Rack > Digitech GSP1101 > 1976 Marshall JMP 50W (1987) > Marshall MX212 (Celestion Seventy80)
This is my pedalboard. There are many others like it, but this mine; I built it to have virtually all 'my' analog tones.
It's not actually in-use. This is more like a grab-and-go jam board where I know I can use all the tones no matter the amp. More-or-less.
All the cables in the signal path are the same (Lava min-ELC), the tuner is out of the signal path, and it's all buffered in/out through the Empress.
Now to figure out how to add the RC/AC into this...
Got myself a Katana Mini amp for mobile shredding.
woah thats some next level balancing haha
Nothing new, but we're all moved into our new jam space.
my current rig:
pod xt pro
behringer a500 poweramp
bugera 4x12 with v30s
networking rack with built in lighting and cooling fans
very happy with my "budget axefx" setup, sounds really good.
Whoa!?! Forget the Katana. What guitar is that? I really like it a lot.
Thx, built it myself.
My new death metal amp
As of yesterday, my new mesa Mark V 25W:
New pedalboard coming this year, just need to get some aluminium for some connections and get it fabricated, painted and then installed and with everything else i have ready, and ill have a balling small rig by the years out. It just needs a coupe of weekends work when i have the time.
This is a year of change. Change for the better.