Line 6 Pod X3 into Peavey 6505 Troubleshooting

Discussion in 'Standard Guitars' started by dribadol, Aug 11, 2014.

  1. dribadol

    dribadol SS.org Regular

    Messages:
    14
    Likes Received:
    0
    Joined:
    Aug 10, 2014
    Location:
    Brooklyn
    Im trying to use my line 6 pod x3 through my effects loop in my peavey 6505. I want the effects of the podx3 (delay,reverbs,volume swells) but do not want to use any of the amp modeling. Ive researched and the best way is supposedly as follows...Im taking a cable from the effects loop send and putting it into the POD INPUT, another cable from the POD OUTPUT to the FX return. I had this setup working properly at one point, then my roommates got a hold of it and for some reason I cant get tone to pass through. Does anyone have any suggestions?

    ALSO
    Im trying to use pedals additional pedals as well. Guitar>TU-2>ISP DECIMATOR>MAXON OD808>AMP INPUT
     
  2. Leuchty

    Leuchty Previously CYBERSYN

    Messages:
    6,692
    Likes Received:
    385
    Joined:
    Sep 7, 2008
    Location:
    Sunny Coast, Australia
  3. dribadol

    dribadol SS.org Regular

    Messages:
    14
    Likes Received:
    0
    Joined:
    Aug 10, 2014
    Location:
    Brooklyn
    CYBERSYN Ive tried that multiple times with poor results, I believe thats what they call the "4 cable method". I feel like its a setting I have messed up on the actual pod x3
     

    Attached Files:

Share This Page