Ibanez RG550 '91 MKB - Mod Project

Discussion in 'Luthiery, Modifications & Customizations' started by Daniel_V, May 9, 2012.

  1. Daniel_V

    Daniel_V FullCircle

    Messages:
    58
    Likes Received:
    32
    Joined:
    Sep 21, 2009
    Location:
    Sofia, Bulgaria
    Hey there!
    New guy here! I've been 'lurking' here for a long time but now I want to share with you a project I'm about to start.

    Long story short - I have a '91 Ibanez RG550 MBK. Its pretty modded right now..

    [​IMG]
    The specs:
    Basswood Body
    Maple Neck and FretBoard (Previous owner had the neck refinished and restored to original with new frets)
    Bidge PU: DiMarzio Super Distortion
    Middle PU: Removed
    Neck PU: Fernandes Sustainer FSK401
    Electronics: SeymourDuncan Pots and SwitchCraft Jack
    Misc: Dunlop StrapLocks, Some stickers (Marshall UK flag, Custom EDGE sticker on headstock)


    _______________________________
    Little history of the guitar as I know it.. (Skip if you want)

    The first owner used the guitar as a lefty (Hendrix style) and bolted the strap button to the lower horn leaving the guitar with a decent hole in it. The guitar was heavily played on stage as it seems. Dings and scratches - SHE HAS IT :D!
    The next owner (the guy I bought it off) installed the sustainer (probably himself) with the original V2 and S1 pickups. The job was.. :facepalm: :nuts: :wallbash: :lol:
    The pots and the 5-way were original and almost 18yo at the time so you can say they were scratchy at the least.
    I reassembled the guitar with new quality pots, switches and wires.
    I was in love with it, but the sustainer was really weak. I tweaked it almost every possible way. I found a position the Sustainer Mode was OK but still - the Harmonic Mode was completely unstable and I had to pick really hard to hear something like a harmonic - totally not the point of the unit.
    Then I installed HighEnd 3 Way Lever Switch, SD Pots and DiMarzio Super Distortion (got rid of the S1 in the middle) and.. Eureka! (Thumps Up for a nerdy cheer-up! :lol: )

    The guitar stayed like this almost two years. Tuned in E , so as you can imagine - a guy posting here doesn't play E standard as an everyday basis. Last month I was given lots of string sets in different gauges to find my favorite one (I'll probably endorse the maker here in Bulgaria, hopefully in the Europe catalog) and thought why not put them on the 550, tune it to my favorite Drop C and see how it goes. After that I can't put down the darn guitar.
    _______________________________

    All and all - I love the guitar but that old, matted and flat black finish is just boring. I know it's somewhat a limited model - Maple neck with black finished body - they are few, but when you have mainly dark-colored guitars and you want this one to stand out - I cant see any other way but to REFINISH the damn thing! :metal:

    I'm thinking of stripping the body down, putting a natural veneer on top, maybe stain it and oil-finish it. I want an unfinished wood feel, to breathe and sound more open. (Like the RGA32 MOL -Sorry, I worked some years in the local Ibanez dealership as a main repair/setup guy and dealer so I know the catalogs like my ABCs.)

    Today I'm heading out to the veneer and wood shop in a near city and going to check what they have as options.

    Here are some mock-ups.
    [​IMG]

    I have other Ideas too but first I have to see what the veneer shop has to offer. I was thinking to save the black/white theme of the original guitar and do something flamed/quilted and then stain it black, sand it a bit so the grain stands up and then just oil finish it. Same on the back - just stain black the basswood and oil it.

    The questions:
    1. Anyone done this before? Flame top just Oil finished? Can this be done?
    2. Have any good ideas? Help a brother out.. I like swirled finishes but not this time. Something 'woody' and natural.
    3. Anyone have a blueprint or CorelDraw of the original 550 pickguard? Since I dont use the middle PU - HH pickguard will be better than this (covered with black sticker) and I want to make some adjustments for pot positions, switches and so on. It will be handy when laser cutting the new replacement.


    Ok thats for now. Sorry for the long read.
    I'll update with news on the veneers!

    Cheers!
    Dann
     
  2. Daniel_V

    Daniel_V FullCircle

    Messages:
    58
    Likes Received:
    32
    Joined:
    Sep 21, 2009
    Location:
    Sofia, Bulgaria
    Got some veneer... Not exactly what I was expecting.. but for 18$ I got so much I can refinish 10 guitars... :D

    Bought 1x2meters Zebra Wood and 1x2m Makassar type wood.
    The guy from the Wood/Veneer shop wasn't sure about the right name of the wood too. I was left alone in a huge warehouse to chase down what I was looking for. Nothing fancy in the whole building really - so after 15min I got these two, payed and hit the gas back home. These days I'll go on a quest again 'cuz I'm not very satisfied with what I got. Some Flamed/Quilted Maple would be nice..

    BTW: The project will start as soon as I find Tung-Oil here in Bulgaria and when I'm satisfied with the veneer material. On another note - I'll need the guitar in the studio for recording with my band. So maybe another 2-3 week I hope and I'll strip down the body. :hbang:
     

    Attached Files:

  3. Zombie13

    Zombie13 Guitartist

    Messages:
    4,085
    Likes Received:
    439
    Joined:
    May 10, 2007
    Location:
    San Diego, California
    I like it as is, but good luck !
     
  4. devolutionary

    devolutionary No longer 7-less

    Messages:
    620
    Likes Received:
    33
    Joined:
    Sep 30, 2010
    Location:
    Auckland
    There's something cool about the black with black pickguard and then BOOM! Maple neck!

    I look forward to seeing the veneers though. It'll be curious to see how it applies, since you do see good stories and then some very much not good stories :p
     
  5. noob_pwn

    noob_pwn SS.org Regular

    Messages:
    1,691
    Likes Received:
    737
    Joined:
    Aug 28, 2008
    Location:
    Sydney, AUS
    Paint it loch ness green
     
  6. Aevolve

    Aevolve Yugen.

    Messages:
    1,195
    Likes Received:
    115
    Joined:
    Jun 28, 2011
    Location:
    Atlanta, GA
    My vote's either for the natural or zebra. :yesway:
     
  7. Daniel_V

    Daniel_V FullCircle

    Messages:
    58
    Likes Received:
    32
    Joined:
    Sep 21, 2009
    Location:
    Sofia, Bulgaria
    Thanks for the comments, guys!

    @ZOMB13, devolutionary - I love it like that two, but my RG7321 is black, ART320 - black, PRS Tremonti - black, S5470 kinda dark, Custom KD - dark again.

    I think I need something more light colored.

    @noob_pwn - I like LNG but I dont think is suites my style, needs ect..

    @PeachesMcKenzie - I love the natural too, but since nobody knows what will show up on the basswood I got the zebra just in case. If I like what show up underneath maybe just Oil it and leave as is.




    But I gotta ask - someone to know a good exotic wood dealer somewhere in Europe I can trust? Not for this project, bot why don't ask here.

    Thanks! See ya!
     

Share This Page