Boss GT1000 IR loader and OUTPUT AIRD Output Library is now Available

Discussion in 'Gear & Equipment' started by Nhoj, May 18, 2018.

  1. Nhoj

    Nhoj SS.org Regular

    Messages:
    113
    Likes Received:
    33
    Joined:
    Apr 22, 2018
    https://www.boss.info/global/products/gt-1000/downloads/

    https://www.facebook.com/groups/BossGT1000Users/

    Format of IR data that can be loaded:
    Format (extension): WAV (.wav)
    Sampling frequency 44.1, 48, 96 kHz
    Bit rate 16, 24-bit linear format

    Boss Tone Studio for Android update is out
    1.0.2
    Requires gt-1000 firmware 1.10

    With the release of the Output Library tool, BOSS has released some new OUTPUT types to correspond to popular amps one might run the GT-1000 into (it looks like you can load 2 additional types in addition the Roland/BOSS amps included already.

    GT-1000 AIRD Output Select Library data is the GT-1000 connection settings data loadable with the GT-1000 AIRD Output Select Library software.


    Hot Rod Deluxe RETURN
    A setting for the connection to the RETURN jack of the Fender Hot Rod Deluxe guitar amp.

    Twin Reverb INPUT
    A setting for the connection to the guitar input of the Fender Twin Reverb guitar amp.

    AC30 INPUT
    A setting for the connection to the guitar input of the VOX AC30 guitar amp.

    JCM2000 412 RETURN
    A setting for the connection to the RETURN jack of the Marshall JCM2000 guitar amp.
    The connected cabinet is assumed to be a Marshall cabinet with four 12" speakers.

    JVM410H 412 RETURN
    A setting for the connection to the RETURN jack of the Marshall JVM410H guitar amp.
    The connected cabinet is assumed to be a Marshall cabinet with four 12" speakers.

    Rectifier 412 RETURN
    A setting for the connection to the RETURN jack of the MESA/Boogie Rectifier guitar amp.
    The connected cabinet is assumed to be a MESA/Boogie cabinet with four 12" speakers.

    TriAmp 412 RETURN
    A setting for the connection to the RETURN jack of the Hughes & Kettner TriAmp guitar amp.
    The connected cabinet is assumed to be a Hughes & Kettner cabinet with four 12" speakers.
     
  2. Nhoj

    Nhoj SS.org Regular

    Messages:
    113
    Likes Received:
    33
    Joined:
    Apr 22, 2018
    GT-1000 System Program (Ver.1.11)
    How to know the version
    Before you start, check the system program version of your GT-1000.
    1. While holding down [ EXIT ] button, turn power ON.
      Continue to hold down EXIT until the GT-1000 logo appears on the display.
    2. After a short while, the version information appears on the display.
      If this shows the latest version (Version 1.11 or later), there's no need to update your GT-1000.
    3. After verifying the displayed version, turn off the power.

    Update history
    [ Ver.1.11 ] MAY 2018
    Bug Fix
    The following bug was fixed.
    • Patch data that uses IR data cannot be saved correctly.

    [ Ver.1.10 ] MAY 2018
    Additional Functions
    • GT-1000 AIRD Output Select Library can now be used to add Output Select types.
    • GT-1000 IR Loader can now be used to add speaker types.
    Bug Fixes
    The following bugs were fixed.
    • At the TUNER screen, the tuner sometimes fails to operate.
    • In a patch change immediately after a WRITE or EXCHANGE operation to a different patch, the sound sometimes fails to play correctly.
    • When KNOB SETTING is used to assign DISTORTION 2 LEVEL (BOTTOM), BOTTOM (LEVEL) changes.
    • The sound fails to be changed when STOMPBOX data backed up to BOSS TONE STUDIO is restored.
    • Faulty display on the GT-1000's built-in screen when using BOSS TONE STUDIO.

    [ Ver.1.05 ] APR 2018
    Bug Fix
    The following bug was fixed.
    • When selecting "JC-120 INPUT" in the AIRD OUTPUT SELECT and connect to a JC-120 input, some AIRD Preamps produce unintended sounds.

    What you will need to update your GT-1000
    • GT-1000
    • USB cable
    • A computer with a USB connector ( Windows, Mac )
    Caution when performing the update
    • If you update on the normal mode of GT-1000 against the correct procedrue, this update data may destroy the system program.
    • Never power-off your GT-1000 while the update is in progress!
      If a power failure or similar accident occurs during the update process, the GT-1000 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
    • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.
    Getting the update file
    Please open/extract the downloaded "gt1000_sys_v111.zip" file on your computer to get the update file in the "gt1000_sys_v111" folder.

    Procedure for the update
    1. Hold down [ WRITE ] button and turn on the power.
      * Continue to hold down WRITE until "GT-1000 Updater" appears on the display.
    2. Connect the computer to the GT-1000's USB port by a USB cable.
    3. Open the "GT-1000" drive folder in your personal computer.
      [ Windows users ]
      Within My Computer (or Computer), open "GT-1000" (or Removable Disk).
      [ macOS / OS X users ]
      On the desktop, open the "GT-1000" icon.
    4. Copy (drag and drop) the "GT-1000_UPA_up.bin" in the "gt1000_sys_v111" folder into the root directory of the "GT-1000" drive.
    5. After the copy has been completed, unmount or remove the drive on your computer.
      With Windows
      Right-click on the "GT-1000" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."
      With macOS / OS X
      Drag the "GT-1000" icon to the Trush icon in the Dock.
    6. Disconnect the USB cable.
      The message "Execute update ? ([WRITE]: execute, [Power off]:abort)" will appear on the display.
    7. Press [ WRITE ] button to start the update process.
    8. The message "Update is completed." will appear on the display when the update process completes.
    9. Turn the GT-1000 power off.
      Please verify the version number "1.11" with the procedure described in "How to tell the version" part of this document.

      https://www.boss.info/global/suppor...drivers/3d0b9483-07bd-4210-921e-750eb4b9162c/



     
  3. Nhoj

    Nhoj SS.org Regular

    Messages:
    113
    Likes Received:
    33
    Joined:
    Apr 22, 2018
  4. Nhoj

    Nhoj SS.org Regular

    Messages:
    113
    Likes Received:
    33
    Joined:
    Apr 22, 2018

Share This Page