My jackson custom shop spec form

sevenstringdeath · 12-08-2006, 01:37 PM

roughly how much would this hurt my wallet, also, could i get them to use the ibanez type Barrel input jack rather than the plate?
and could i also ask them to make the neck thinner?
thanks

BODY Construction: Neck-Thru Guitar
Construction Options: None
Body Description: Soloist SLS
Body Wood: Mahogany
Top Wood Options: 1/8" Spalt Maple Top
Body Binding (Front) None
Body Binding (Back) None
Other Body Options: Carved Top - Archtop
Body Scalloping: Scalloped Heel and Horn
Neck Description:Jackson Style Headstock Reversed
Neck Wood: Quartersawn Maple
Neck Option: Standard
Fingerboard Wood: Ebony
Fingerboard Inlays: None
Fingerboard Inlay Options: None
Nut Width Guitar: 1 11/16"
Butt Width Guitar: 2 1/4"
Scale Length Guitar: 25.5"
Number of Frets Guitar: 24 Fret Wire Jumbo
Fret Scallops: 15-24
Neck and Head Binding: Neck and Headstock
Neck and Head Binding Color: White
Neck and Head Binding Options: None
Neck Back Shape: Standard - like SL-1

PARTS
Bridge: Floyd Rose Pro
Bridge Recess: (Floyd Rose bridges only) Standard Tremolo Recess
Nut: Locking
Jack Location: Side of Body
Jack Type: Oval Plate
Strap Buttons: Schaller
Tuners: Sperzel
Hardware Color Black
Knobs: Metal Dome
Pickguard and Control Mounting: No PG - Rear-loaded Controls
Battery Cavity: 9 Volt
Truss Rod Cover: Standard
CONTROLS
Pickup Route: 2 HUM
Pickup Bezels: None
Active Electronics: None
Covered Pickup Yes
Pickup Options: EMG (2H)
Volume Control Knobs: One
Tone Control Knobs: One
Knob Options: Metal Dome
Other Controls: None
Pickup Selector: 3-Way Toggle
Other Switches: On/Off Kill Button
FINISH
body finish: black
Neck Finish: Standard
Pickup Finish None
Headstock Type: Reversed
Headstock Color: Black
Headstock Options :None
Logo Color: Abalone
OTHER
COMMENTS emg 81(bridge), emg 89 (neck), scalloped frets from 15-24

Metal Ken · 12-08-2006, 01:43 PM

Quote:

Originally Posted by sevenstringdeath

roughly how much would this hurt my wallet, also, could i get them to use the ibanez type Barrel input jack rather than the plate?
and could i also ask them to make the neck thinner?
thanks

They didnt give you a price quote? Sounds like it'd be in the region or 3-4 grand, or so. As far as the input jack, just make sure you specifiy. im not sure about the neck profile, though.

eaeolian · 12-08-2006, 01:49 PM

You could go for the thinner "speed" neck, which should be one of the options. Cost? I don't know, but I'd guess in the 3K range...

sevenstringdeath · 12-08-2006, 01:53 PM

how does the speed neck stack up to a wizard or a wizard II?

kmanick · 12-08-2006, 02:34 PM

I'm guessing around $3,000..
why the Floyd rose Pro? don't you want an OFR?

Benzesp · 12-08-2006, 02:57 PM

Great wood choices. Probabbly sound Killa!. Spalted tops are really amazing looking.

darren · 12-08-2006, 03:05 PM

Oh, and BTW... electric guitars generally don't have "input" jacks. Sound goes out... it's an output jack.

sevenstringdeath · 12-08-2006, 04:54 PM

cause floyd rose pro is the lo profile version of the OFR atleast thats why i thought, and i found out the jack on the SLSMG body is a barrel anyways, seeing as to the body is so thin thats all they could fit im guessing.
oh, and thanks for the correction darren, i knew that but ive always called them input jacks for some reason

noodles · 12-09-2006, 08:58 PM

Quote:

Originally Posted by sevenstringdeath

how does the speed neck stack up to a wizard or a wizard II?

Very similar. My old KE1 had one, and the KV1 had it as well. It was like they took the standard Jackson profile and flattened out in the middle.

sevenstringdeath · 12-10-2006, 12:37 AM

im thinking a 3/4" spalted top instead of the 1/8", tonally it would make it a little brighter correct?

12-08-2006, 01:37 PM	#1
sevenstringdeath death metal guru! Join Date: Oct 2006 Location: Yorktown, Virginia Posts: 152 Real Name: Brandon Main Seven: RG1570 (i know its a sixxer) Thanked: 0	My jackson custom shop spec form roughly how much would this hurt my wallet, also, could i get them to use the ibanez type Barrel input jack rather than the plate? and could i also ask them to make the neck thinner? thanks BODY Construction: Neck-Thru Guitar Construction Options: None Body Description: Soloist SLS Body Wood: Mahogany Top Wood Options: 1/8" Spalt Maple Top Body Binding (Front) None Body Binding (Back) None Other Body Options: Carved Top - Archtop Body Scalloping: Scalloped Heel and Horn Neck Description:Jackson Style Headstock Reversed Neck Wood: Quartersawn Maple Neck Option: Standard Fingerboard Wood: Ebony Fingerboard Inlays: None Fingerboard Inlay Options: None Nut Width Guitar: 1 11/16" Butt Width Guitar: 2 1/4" Scale Length Guitar: 25.5" Number of Frets Guitar: 24 Fret Wire Jumbo Fret Scallops: 15-24 Neck and Head Binding: Neck and Headstock Neck and Head Binding Color: White Neck and Head Binding Options: None Neck Back Shape: Standard - like SL-1 PARTS Bridge: Floyd Rose Pro Bridge Recess: (Floyd Rose bridges only) Standard Tremolo Recess Nut: Locking Jack Location: Side of Body Jack Type: Oval Plate Strap Buttons: Schaller Tuners: Sperzel Hardware Color Black Knobs: Metal Dome Pickguard and Control Mounting: No PG - Rear-loaded Controls Battery Cavity: 9 Volt Truss Rod Cover: Standard CONTROLS Pickup Route: 2 HUM Pickup Bezels: None Active Electronics: None Covered Pickup Yes Pickup Options: EMG (2H) Volume Control Knobs: One Tone Control Knobs: One Knob Options: Metal Dome Other Controls: None Pickup Selector: 3-Way Toggle Other Switches: On/Off Kill Button FINISH body finish: black Neck Finish: Standard Pickup Finish None Headstock Type: Reversed Headstock Color: Black Headstock Options :None Logo Color: Abalone OTHER COMMENTS emg 81(bridge), emg 89 (neck), scalloped frets from 15-24

12-08-2006, 01:49 PM	#3
eaeolian The Church of SEVEN • Super Moderator • Join Date: Jul 2005 Location: Woodbridge, VA Posts: 8,124 Real Name: Mike Main Seven: Jackson CS Soloist 7 Rig: Mesa Triple Recto Thanked: 30	You could go for the thinner "speed" neck, which should be one of the options. Cost? I don't know, but I'd guess in the 3K range... Division - American metal that doesn't suck. Much. Even on MySpace, and Soundclick, too.

12-08-2006, 02:34 PM	#5
kmanick Senior Member Join Date: Aug 2006 Location: BOSTON Posts: 3,105 Real Name: Nick Main Seven: Carvin DC727C/Ibby 7620RB Rig: Mesa Mark III/6505+ Thanked: 43 $kmanick is rather kvlt and tr00. \m/$ $kmanick is rather kvlt and tr00. \m/$ $kmanick is rather kvlt and tr00. \m/$ $kmanick is rather kvlt and tr00. \m/$ $kmanick is rather kvlt and tr00. \m/$ $kmanick is rather kvlt and tr00. \m/$ $kmanick is rather kvlt and tr00. \m/$	I'm guessing around $3,000.. why the Floyd rose Pro? don't you want an OFR? Can I be the devil on your shoulder?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For Sale - USA Jackson Custom Shop 7 String	brett8388	Guitars For Sale / Trade / Wanted	13	04-18-2007 06:20 AM
Look at this what I created with that Jackson custom shop program!	Karl Hungus	Standard Guitars	4	10-27-2006 02:54 PM
Jackson Custom shop 7 strings	Charlz	Sevenstring Guitars	29	05-05-2006 04:46 PM
7 string custom shop jackson kelly	xzacx	Sevenstring Guitars	42	03-12-2006 03:01 PM
Jackson King-V Custom Shop 7 String	jtm45	Sevenstring Guitars	43	06-29-2005 07:14 PM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

12-08-2006, 01:53 PM	#4
sevenstringdeath death metal guru! Join Date: Oct 2006 Location: Yorktown, Virginia Posts: 152 Real Name: Brandon Main Seven: RG1570 (i know its a sixxer) Thanked: 0	how does the speed neck stack up to a wizard or a wizard II?

12-08-2006, 02:57 PM	#6
Benzesp IdrinkYourMilkshake! Join Date: Dec 2006 Location: Austin,TX Posts: 955 Real Name: Benny Main Seven: Custom Ukulele 7 Rig: Splawn>2 Mesa 4x12's Thanked: 16	Great wood choices. Probabbly sound Killa!. Spalted tops are really amazing looking.

12-08-2006, 03:05 PM	#7
darren Mr. Negative Pants™ Join Date: Oct 2004 Location: Greater Toronto Area, Canada Posts: 8,105 Main Seven: modded Dean EVO Special 7 Main ERG: Agile Intrepid Standard Rig: Mesa F-30 -> Thiele Thanked: 42	Oh, and BTW... electric guitars generally don't have "input" jacks. Sound goes out... it's an output jack.

12-08-2006, 04:54 PM	#8
sevenstringdeath death metal guru! Join Date: Oct 2006 Location: Yorktown, Virginia Posts: 152 Real Name: Brandon Main Seven: RG1570 (i know its a sixxer) Thanked: 0	cause floyd rose pro is the lo profile version of the OFR atleast thats why i thought, and i found out the jack on the SLSMG body is a barrel anyways, seeing as to the body is so thin thats all they could fit im guessing. oh, and thanks for the correction darren, i knew that but ive always called them input jacks for some reason

12-10-2006, 12:37 AM	#10
sevenstringdeath death metal guru! Join Date: Oct 2006 Location: Yorktown, Virginia Posts: 152 Real Name: Brandon Main Seven: RG1570 (i know its a sixxer) Thanked: 0	im thinking a 3/4" spalted top instead of the 1/8", tonally it would make it a little brighter correct?


	Powered by vBulletin 3.7.3 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. Search Engine Optimization by vBSEO 3.2.0 "777" Logo © Darren Wilson Privacy Policy Affiliate Links Directory

» Standard Guitars

My jackson custom shop spec form