Ibanez Floyd Question/guitar paint question

DaemonSvek · 05-03-2008, 11:12 PM

Well, being the die hard ESP fan that i am i have always been sceptical of buying other guitars, but i got this RG prestige for a deal for a project and am in the need of some serious advise.
first off.
I LOATH the Ibanez bridge/floyd copy thing. nothing but frustration

my ESP M-II's are lovely, i mean they're like gods

i hate it, i just don't like it and was wondering what would be involved with replacing it with a genuine Original Floyd Rose 7 string bridge? also, i'm not fond of the pickups either, or the paintjob since it's been chipped badly i'd like to repaint it.

since the stock pickups are not active how involved would it be to slap some EMG 707's in there? your help would be greatly appreciated

strap up, plug in, rock on
stay metal

-JR

TemjinStrife · 05-04-2008, 12:02 AM

There are probably answers to this in the "Pickups/Electronics/General Tech section, so take a look and odds are you'll find your answers without much trouble.

That said, I don't know much about Ibanez trems, but adding in EMG 707s or Blackouts would require some routing. In the case of the EMGs or Phase II Blackouts (the big square ones) you'd have to rout out for depth as well as the sides of the pickups, as they're a little wider on the corners than the stock passive pickups.

If you go with Phase I Blackouts (my own personal recommendation...) you will either have to shim the neck or route out the pickup holes to a greater depth, as well as widen the ears and stuff. The pots would have to be swapped to 25kohm pots, and a stereo jack with battery clip would have to be added.

Why not sell it and buy something more in line with what you're looking for?

DaemonSvek · 05-04-2008, 12:12 AM

hey man, thanks for the help. well, with the paint chips and everything i seriously doubt i'd get much for it but every little bit does help, it would help me save up for the Horizon FR-II

plus if i sell it i wouldn't have a 7 and what use would i be on here? lol
i would if there were any serious takers, all kidding aside, minor cosmetic flaws and all. i'm in a hotel right now and not on my personal comp so i have no pictures available but if there is any interest i will sell it ASAP but the prospect of a semi-custom build project is always fun

why, u wanna buy it? lol
be cool guys

Metal Ken · 05-04-2008, 12:27 AM

Which ibanez trem is it? If its a TRS type, then you can direct swap with an OFR 7. Others might work (Same trem post spacing, but different route sizes) but im not sure if they're direct or not.

Also, +1 for blackouts. They're passive sized, but you'll probably have to, as stated above, route down a bit, but thats easier to do since its not a cosmetically oriented routing job.

DaemonSvek · 05-04-2008, 01:35 AM

Edge pro 7 bridge

Aled Smith · 05-04-2008, 02:16 AM

yeah, im not a great fan myself since i got my RG350 and RG1527. I cant get good gargles with them. I think im converting to ESP and OFR

DaemonSvek · 05-04-2008, 02:53 AM

good call, ESP makes the best axes in the world...you don't my RG then huh?
lol

	sevenstring guitars		sevenstring registry		photo gallery		merch

05-03-2008, 11:12 PM	#1 (permalink)
DaemonSvek ESP WHORE Join Date: May 2008 Location: Louisiana/Virginia Posts: 121 Real Name: Jeff Main Seven: ESP M-II Main ERG: ESP SC Sig (SPF) Rig: 6505+/Vader cabs Thanked: 3	Ibanez Floyd Question/guitar paint question Well, being the die hard ESP fan that i am i have always been sceptical of buying other guitars, but i got this RG prestige for a deal for a project and am in the need of some serious advise. first off. I LOATH the Ibanez bridge/floyd copy thing. nothing but frustration my ESP M-II's are lovely, i mean they're like gods i hate it, i just don't like it and was wondering what would be involved with replacing it with a genuine Original Floyd Rose 7 string bridge? also, i'm not fond of the pickups either, or the paintjob since it's been chipped badly i'd like to repaint it. since the stock pickups are not active how involved would it be to slap some EMG 707's in there? your help would be greatly appreciated strap up, plug in, rock on stay metal -JR

05-04-2008, 12:27 AM	#4 (permalink)
Metal Ken Sanctity In Blasphemous Ruin • Super Moderator • Join Date: Jun 2004 Location: Florida Posts: 22,352 Real Name: Legion Main Seven: Loomis, C7HR, Giannini 7 Rig: Mesa Rectoverb 50 Thanked: 83	Which ibanez trem is it? If its a TRS type, then you can direct swap with an OFR 7. Others might work (Same trem post spacing, but different route sizes) but im not sure if they're direct or not. Also, +1 for blackouts. They're passive sized, but you'll probably have to, as stated above, route down a bit, but thats easier to do since its not a cosmetically oriented routing job. Glory and praise to Thee, Satan, on high, Where Thou didst reign, in Hell where Thou dost lie, Vanquished, silent, dreaming eternally. Grant that my soul some day rest close to Thee Under the Tree of Knowledge which shall spread Its branches like a Temple overhead. ~Charles Baudelaire http://www.myspace.com/impurity Brutal Skullfucking Death Metal

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Floyd Rose question	BLS	Standard Guitars	27	04-30-2008 11:19 PM
Licensed Floyd 7 Question on LTD guitar	drjenkins	Pickups, Electronics & General Tech	7	03-13-2008 08:02 PM
Floyd Rose question	jarrydn	Pickups, Electronics & General Tech	2	03-29-2007 06:23 PM
Quick Floyd question...	urklvt	Sevenstring Guitars	5	04-06-2006 12:02 PM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

05-04-2008, 12:02 AM	#2 (permalink)
TemjinStrife Power Metal Cellist Join Date: Dec 2007 Location: Vermont Posts: 675 Real Name: Josh Main Seven: Dean EVO 7 Special Rig: PODXT Thanked: 8	There are probably answers to this in the "Pickups/Electronics/General Tech section, so take a look and odds are you'll find your answers without much trouble. That said, I don't know much about Ibanez trems, but adding in EMG 707s or Blackouts would require some routing. In the case of the EMGs or Phase II Blackouts (the big square ones) you'd have to rout out for depth as well as the sides of the pickups, as they're a little wider on the corners than the stock passive pickups. If you go with Phase I Blackouts (my own personal recommendation...) you will either have to shim the neck or route out the pickup holes to a greater depth, as well as widen the ears and stuff. The pots would have to be swapped to 25kohm pots, and a stereo jack with battery clip would have to be added. Why not sell it and buy something more in line with what you're looking for?

05-04-2008, 12:12 AM	#3 (permalink)
DaemonSvek ESP WHORE Join Date: May 2008 Location: Louisiana/Virginia Posts: 121 Real Name: Jeff Main Seven: ESP M-II Main ERG: ESP SC Sig (SPF) Rig: 6505+/Vader cabs Thanked: 3	hey man, thanks for the help. well, with the paint chips and everything i seriously doubt i'd get much for it but every little bit does help, it would help me save up for the Horizon FR-II plus if i sell it i wouldn't have a 7 and what use would i be on here? lol i would if there were any serious takers, all kidding aside, minor cosmetic flaws and all. i'm in a hotel right now and not on my personal comp so i have no pictures available but if there is any interest i will sell it ASAP but the prospect of a semi-custom build project is always fun why, u wanna buy it? lol be cool guys

05-04-2008, 01:35 AM	#5 (permalink)
DaemonSvek ESP WHORE Join Date: May 2008 Location: Louisiana/Virginia Posts: 121 Real Name: Jeff Main Seven: ESP M-II Main ERG: ESP SC Sig (SPF) Rig: 6505+/Vader cabs Thanked: 3	Edge pro 7 bridge

05-04-2008, 02:16 AM	#6 (permalink)
Aled Smith ss.org Regular Join Date: Mar 2007 Location: Wrexham in north wales Posts: 207 Thanked: 0	yeah, im not a great fan myself since i got my RG350 and RG1527. I cant get good gargles with them. I think im converting to ESP and OFR

05-04-2008, 02:53 AM	#7 (permalink)
DaemonSvek ESP WHORE Join Date: May 2008 Location: Louisiana/Virginia Posts: 121 Real Name: Jeff Main Seven: ESP M-II Main ERG: ESP SC Sig (SPF) Rig: 6505+/Vader cabs Thanked: 3	good call, ESP makes the best axes in the world...you don't my RG then huh? lol


	Powered by vBulletin 3.7.2 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. LinkBacks Enabled by vBSEO 3.1.0 "777" Logo © Darren Wilson Content © 2008 Sevenstring.org LLC - Privacy Policy Affiliate Links Directory

» Sevenstring Guitars

Ibanez Floyd Question/guitar paint question