Replacing the body on my 7620 (56k = lol

supertruper1988 · 05-01-2008, 04:50 PM

So a few months ago i spotted an interesting body in Chris Woods' store. I though ok i can fix it up and for $99 its a steal

This is the body i got:

so the other day it finally showed up and i got to work on it last night.

So i started with this mess where the CNC machine messed up.

About two hours later i was down to this.
I used a file to get out most of the cuts and then i sanded it with 150 grit and then 220 to get to what you see here.

Tonight or tomorrow night i am going to sand dwon the body with 220 and 500 and route around the edges with a 1/8" round bit so that they arent so sharp.

I will update with pics as i go along.

hirah · 05-01-2008, 05:43 PM

Quote:

So i started with this mess where the CNC machine messed up

cnc machines dont mess up, people mess up cnc machines

seriously, i have only seen 1 time in the last 13 years where a cnc machine was at fault for a mistake. the countless other times have been operator error.
looks like a bit of work ahead. good luck.

Codyyy · 05-01-2008, 08:10 PM

Not going to lie man, I liked it better before, with the "mistake".

It's a badass rake effect that someone should totally purposely do to parts of a guitar like that.

Metal Ken · 05-01-2008, 08:13 PM

well, at least when you get it finished, the RG'll sound tons better \m/

Gonna leave it natural?

supertruper1988 · 05-01-2008, 09:45 PM

Yeah i am going to put satin finish on her

05-01-2008, 04:50 PM	#1
supertruper1988 ss.org Regular Join Date: Nov 2006 Location: Valley of the Sun, AZ Posts: 729 Real Name: Cameron Main Seven: '98 RG7620 Royal Blue Rig: Peavey Valveking 212 Thanked: 17	Replacing the body on my 7620 (56k = lol So a few months ago i spotted an interesting body in Chris Woods' store. I though ok i can fix it up and for $99 its a steal This is the body i got: so the other day it finally showed up and i got to work on it last night. So i started with this mess where the CNC machine messed up. About two hours later i was down to this. I used a file to get out most of the cuts and then i sanded it with 150 grit and then 220 to get to what you see here. Tonight or tomorrow night i am going to sand dwon the body with 220 and 500 and route around the edges with a 1/8" round bit so that they arent so sharp. I will update with pics as i go along. Each guitarist has an evil fat 40 year old blueswankler trying to get out, If you give in to temptation you'll be sitting next to a fender playing john lee hooker while trying to keep your combover in place. - Desecrated

05-01-2008, 08:10 PM	#3
Codyyy The Flip-Flopper Join Date: Jun 2007 Location: Massachusetts Posts: 1,737 Real Name: Cody Main Seven: Loomis TOM Rig: Carvin V3 - Avatar Thanked: 61 $Codyyy is rather kvlt and tr00. \m/$ $Codyyy is rather kvlt and tr00. \m/$ $Codyyy is rather kvlt and tr00. \m/$ $Codyyy is rather kvlt and tr00. \m/$ $Codyyy is rather kvlt and tr00. \m/$ $Codyyy is rather kvlt and tr00. \m/$ $Codyyy is rather kvlt and tr00. \m/$	Not going to lie man, I liked it better before, with the "mistake". It's a badass rake effect that someone should totally purposely do to parts of a guitar like that. Schecter Loomis-7 TOM

05-01-2008, 08:13 PM	#4
Metal Ken Sudden Impact • Super Moderator • Join Date: Jun 2004 Location: Florida Posts: 17,174 Real Name: Legion Main Seven: Loomis, C7HR, Giannini 7 Rig: Mesa Rectoverb 50 Thanked: 79	well, at least when you get it finished, the RG'll sound tons better \m/ Gonna leave it natural? Almighty asmodeus, existant of chaos Ominous be thy name Thy kingdom come on earth Lead me into all temptation of my flesh So I may trespass greatly into Thy ways by my desires ~Fornicatus Benefictus Thrashin' Is my business, and business is good. http://www.myspace.com/impurity Brutal Skullfucking Death Metal

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: 1527 neck 7620 body and edge lo pro 7	LeadFoot15	Gear For Sale / Trade/ Wanted	14	02-18-2008 11:29 AM
WTB: Ibanez RG 7620 Body.	LeadFoot15	Gear For Sale / Trade/ Wanted	10	12-13-2007 05:52 PM
7620 & RG5EX1 body mod updates... (56K, make some tea)	soldierkahn	Sevenstring Guitars	18	12-11-2007 02:34 AM
Fs rg 7620 body	velocity	Gear For Sale / Trade/ Wanted	16	10-30-2007 11:49 PM
Custom 7620 body	jim777	Sevenstring Guitars	10	06-09-2005 04:03 PM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

05-01-2008, 09:45 PM	#5
supertruper1988 ss.org Regular Join Date: Nov 2006 Location: Valley of the Sun, AZ Posts: 729 Real Name: Cameron Main Seven: '98 RG7620 Royal Blue Rig: Peavey Valveking 212 Thanked: 17	Yeah i am going to put satin finish on her


	Powered by vBulletin 3.7.3 Copyright ©2000 - 2009, Jelsoft Enterprises Ltd. Search Engine Optimization by vBSEO 3.2.0 "777" Logo © Darren Wilson Privacy Policy Affiliate Links Directory

» Sevenstring Guitars

Replacing the body on my 7620 (56k = lol