Custom 7 ideas on the roll

dream-thief · 04-22-2008, 08:31 PM

I've been toying with ideas for a while, First it was a baritone upgrade, then a enck-thru, etc.

I'm pretty stuck on getting a Bolt on 7, but I was wondering if anyone had any advice on the body.

I'm looking for something pretty mcuh identical to Alexi laiho's Limited edition black/pink Sig, so it's a Rhoads style V with quite a cutaway. Because of the extra string on the neck though, i was wondering if i should make the body any bigger to balance it out. Stuh84 has an RR7 and the body on it looks way too small.

Any help appreciated.

JerkyChid · 04-23-2008, 01:47 AM

Well I don't know shit but I'll try to helpI do think the body will need to slightly bigger. Just enough though

OrsusMetal · 04-23-2008, 02:07 AM

Who are you having build the custom for you? Or are you doing it yourself? Almost any luthier that you're talking to a build about should be really informative about that kind of thing. You could try drawing a few pictures too!

dream-thief · 04-23-2008, 07:45 PM

Quote:

Originally Posted by OrsusMetal

Who are you having build the custom for you? Or are you doing it yourself? Almost any luthier that you're talking to a build about should be really informative about that kind of thing. You could try drawing a few pictures too!

I'm getting the neck mode by Roter hopefully, and I'll be building the body for it myself. I know luthiers I could ask about it, but in all honesty I wouldn't value their opinion much on anything outside a modded strat.

sepherus · 04-23-2008, 07:51 PM

Do a Death Rhoads. That would be sick, and there should be an increase in the upper wing length/change in angle to help balance a bit more. If you are worried about the weight being balanced, go with a heavier piece of wood for the body too.

dream-thief · 04-24-2008, 07:23 AM

Quote:

Originally Posted by sepherus

Do a Death Rhoads. That would be sick, and there should be an increase in the upper wing length/change in angle to help balance a bit more. If you are worried about the weight being balanced, go with a heavier piece of wood for the body too.

Death Rhoads...? - I'm not familiar with them, I think.

I was worried about using a heavy piece of wood because Alexi's 6 String one is heavy enough as it is, WIthout adding on the extra size...

Ruins · 04-24-2008, 07:38 AM

make the body wings hollow this will reduce the weight significantly

sepherus · 04-24-2008, 07:57 AM

the Death Rhoads would just be a normal Rhoads with the rear end of a Death Angel. they look really sick. If i ever get a jackson custom its totally what i would order.

As for the Alexi, I'm surprised that its heavy. Alder isn't known for its weight. I always find that V shaped guitars tend to be lighter in the body than most guitars and thus a bit off balanced. Its just a price you have to pay to be so metal.

stuh84 · 04-24-2008, 08:36 AM

Quote:

Originally Posted by dream-thief

Stuh84 has an RR7 and the body on it looks way too small.

Leave my Jackson alone

dream-thief · 04-24-2008, 05:48 PM

Quote:

Originally Posted by stuh84

Leave my Jackson alone

Haha, It's a lovely guitar, no question. It just looks a bit unbalanced from what (little) I've seen of it.

Quote:

Originally Posted by Ruins

make the body wings hollow this will reduce the weight significantly

That'd be pretty hard, considering I'm making the body a one piece job

	sevenstring guitars		sevenstring registry		photo gallery		merch

04-22-2008, 08:31 PM	#1 (permalink)
dream-thief Oscar Is The Dangler Join Date: Jan 2008 Location: Knoydart, Scotland / Leeds, England Posts: 463 Real Name: Lowell Main Seven: H&S Dark Heaven Pro Rig: Engl Thunder>Hayden Thanked: 2	Custom 7 ideas on the roll I've been toying with ideas for a while, First it was a baritone upgrade, then a enck-thru, etc. I'm pretty stuck on getting a Bolt on 7, but I was wondering if anyone had any advice on the body. I'm looking for something pretty mcuh identical to Alexi laiho's Limited edition black/pink Sig, so it's a Rhoads style V with quite a cutaway. Because of the extra string on the neck though, i was wondering if i should make the body any bigger to balance it out. Stuh84 has an RR7 and the body on it looks way too small. Any help appreciated. ~ You've got your chance right now, Or to forever be silent ~ www.myspace.com/wolfenland

04-23-2008, 01:47 AM	#2 (permalink)
JerkyChid Kid of beef jerky Join Date: Mar 2008 Location: Vivian, LA Posts: 132 Thanked: 2	Well I don't know shit but I'll try to helpI do think the body will need to slightly bigger. Just enough though Eat beef jerky and save the chidren!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roll your own...	TonyFlyingSquirrel	General Music Discussion	2	04-16-2008 09:26 AM
Ideas for a TIL custom Baritone 7	ibznorange	Sevenstring Guitars	11	11-21-2007 09:32 PM
My custom 7 ideas	Adamh1331	Sevenstring Guitars	5	04-15-2007 03:14 PM
G3 Boston Roll Call	Chris	General Music Discussion	33	04-07-2007 04:48 PM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

04-23-2008, 02:07 AM	#3 (permalink)
OrsusMetal A Mural Of Twilight Join Date: Mar 2008 Location: Kansas Posts: 550 Real Name: Sean Main Seven: Ibanez RG7321 Custom Main ERG: 25.5 scale for me! Rig: Engl e530 -> GH100L Thanked: 4	Who are you having build the custom for you? Or are you doing it yourself? Almost any luthier that you're talking to a build about should be really informative about that kind of thing. You could try drawing a few pictures too!

04-23-2008, 07:51 PM	#5 (permalink)
sepherus The Elder One Join Date: Nov 2007 Location: Syracuse, NY Posts: 325 Real Name: Jason Main Seven: Sherman on order... Rig: 6505+ mesa recto412 Thanked: 5	Do a Death Rhoads. That would be sick, and there should be an increase in the upper wing length/change in angle to help balance a bit more. If you are worried about the weight being balanced, go with a heavier piece of wood for the body too.

04-24-2008, 07:38 AM	#7 (permalink)
Ruins is zayebeited Join Date: Jan 2008 Location: Germany Posts: 733 Real Name: Alex Main Seven: some crap. "dimavery" Rig: custom home made Thanked: 6	make the body wings hollow this will reduce the weight significantly

04-24-2008, 07:57 AM	#8 (permalink)
sepherus The Elder One Join Date: Nov 2007 Location: Syracuse, NY Posts: 325 Real Name: Jason Main Seven: Sherman on order... Rig: 6505+ mesa recto412 Thanked: 5	the Death Rhoads would just be a normal Rhoads with the rear end of a Death Angel. they look really sick. If i ever get a jackson custom its totally what i would order. As for the Alexi, I'm surprised that its heavy. Alder isn't known for its weight. I always find that V shaped guitars tend to be lighter in the body than most guitars and thus a bit off balanced. Its just a price you have to pay to be so metal.


	Powered by vBulletin 3.7.2 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. LinkBacks Enabled by vBSEO 3.1.0 "777" Logo © Darren Wilson Content © 2008 Sevenstring.org LLC - Privacy Policy Affiliate Links Directory

» Sevenstring Guitars

Custom 7 ideas on the roll