AANJ body @ non-AANJ neck?

c4tze · 12-17-2007, 09:48 AM

heads up to my recent project i need to know if the carving of the aanj rg 7620 body might not to be too big that there could be space between the body and the jem 777 neck if finally bolted on. need to know that because i have to decide between 2 necks which have its auctions end soon...

eelblack2 · 12-17-2007, 09:58 AM

You are putting a 6 string neck on a 7 string body? Im totally confused.

Seperately - I have bolted a non AANJ warmoth 7 neck to a AANJ Ibanez Universe body in the past before but it took me HOURS of shaving both to get the scale back to the way it is supposed to be due to completely incorrect fit. I would NEVER do that again.

Toshiro · 12-17-2007, 10:01 AM

You'd need to add wood to the heel of the UV(I assume here, because there is no 7 string "Jem") all the way to the end of the fretboard overhang for it to work.

JEM & UV Details - Neck Joint

Also, someone tried this once before. Scroll to the very bottom of this page:
Custom Guitars - GC Custom

Metal Ken · 12-17-2007, 10:04 AM

if you want to fit a JEM neck to something, you'd be better off getting a gutted RG 550. A 7620 takes way too much work for something that wont sound as good due to all work you'd have to do to the neck and body, and it'd just be a waste of time. Get a RG550 body or older RG body without a neck. that'd be a bolt and be done with it operation.

c4tze · 12-17-2007, 10:47 AM

sorry sorry, its a universe neck.... and - lol - no i dont want to put a 6 string neck on a 7 string body

thanks a lot until that!!!

Metal Ken · 12-17-2007, 10:51 AM

Okay, cause some people have done some crazy shit, converting 6's to 7s and whatnot. Just wanted to make sure you were sane ;p

c4tze · 12-17-2007, 11:06 AM

its the uv 777 neck... the green one

i had a look on the jemsite article... pooh! thats not going to be a sunday afternoon walkaround...

eelblack2 · 12-17-2007, 11:55 AM

If you end up not using that Green Dot neck, let me know by all means, Ill buy it off you. I cant get enough old UV necks.

c4tze · 12-17-2007, 05:53 PM

hihi, sorry but i think im getting that neck anyway... worst case scenario: warmoth replacement body

	sevenstring guitars		sevenstring registry		photo gallery		merch

12-17-2007, 09:48 AM	#1 (permalink)
c4tze 666? It's 777!!! Join Date: Dec 2007 Location: Lake Constance Posts: 64 Real Name: Cee-Jay Main Seven: RG2127 relic Main ERG: Herc Fede custom Rig: VHT Deliverance Thanked: 0	AANJ body @ non-AANJ neck? heads up to my recent project i need to know if the carving of the aanj rg 7620 body might not to be too big that there could be space between the body and the jem 777 neck if finally bolted on. need to know that because i have to decide between 2 necks which have its auctions end soon... sell me a s 7420. now. always looking for ibz (pre-) prestige necks and bodies, sixxers oder sevenstrings... recent setup: rg 2077 xl + 5150 (diezel kt66 mod) + sonic stomp @ loop + ts 808 + jackson 412 cab w/ stock speakers = kick ass undress

12-17-2007, 10:01 AM	#3 (permalink)
Toshiro Lazy Basterd Join Date: Nov 2004 Location: Port Orange, FL Posts: 5,063 Main Seven: Schecter C7 Blackjack Rig: Laney GH50L & GT8 Thanked: 10	You'd need to add wood to the heel of the UV(I assume here, because there is no 7 string "Jem") all the way to the end of the fretboard overhang for it to work. JEM & UV Details - Neck Joint Also, someone tried this once before. Scroll to the very bottom of this page: Custom Guitars - GC Custom Um, Like Sound Files and Stuff ^_^ oh yeah, and some crappy videos too!

12-17-2007, 10:04 AM	#4 (permalink)
Metal Ken Sanctity In Blasphemous Ruin • Super Moderator • Join Date: Jun 2004 Location: Florida Posts: 22,543 Real Name: Legion Main Seven: Loomis, C7HR, Giannini 7 Rig: Mesa Rectoverb 50 Thanked: 83	if you want to fit a JEM neck to something, you'd be better off getting a gutted RG 550. A 7620 takes way too much work for something that wont sound as good due to all work you'd have to do to the neck and body, and it'd just be a waste of time. Get a RG550 body or older RG body without a neck. that'd be a bolt and be done with it operation. Glory and praise to Thee, Satan, on high, Where Thou didst reign, in Hell where Thou dost lie, Vanquished, silent, dreaming eternally. Grant that my soul some day rest close to Thee Under the Tree of Knowledge which shall spread Its branches like a Temple overhead. ~Charles Baudelaire http://www.myspace.com/impurity Brutal Skullfucking Death Metal

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

12-17-2007, 09:58 AM	#2 (permalink)
eelblack2 H8ing Non Customs Join Date: Aug 2006 Location: Boca Raton, FL Posts: 1,240 Real Name: Lee Main Seven: CS ESP's, LACS, KXK Main ERG: RG2228 Rig: JMP1>Triaxis>9100 Thanked: 6	You are putting a 6 string neck on a 7 string body? Im totally confused. Seperately - I have bolted a non AANJ warmoth 7 neck to a AANJ Ibanez Universe body in the past before but it took me HOURS of shaving both to get the scale back to the way it is supposed to be due to completely incorrect fit. I would NEVER do that again.

12-17-2007, 10:47 AM	#5 (permalink)
c4tze 666? It's 777!!! Join Date: Dec 2007 Location: Lake Constance Posts: 64 Real Name: Cee-Jay Main Seven: RG2127 relic Main ERG: Herc Fede custom Rig: VHT Deliverance Thanked: 0	sorry sorry, its a universe neck.... and - lol - no i dont want to put a 6 string neck on a 7 string body thanks a lot until that!!!

12-17-2007, 10:51 AM	#6 (permalink)
Metal Ken Sanctity In Blasphemous Ruin • Super Moderator • Join Date: Jun 2004 Location: Florida Posts: 22,543 Real Name: Legion Main Seven: Loomis, C7HR, Giannini 7 Rig: Mesa Rectoverb 50 Thanked: 83	Okay, cause some people have done some crazy shit, converting 6's to 7s and whatnot. Just wanted to make sure you were sane ;p

12-17-2007, 11:06 AM	#7 (permalink)
c4tze 666? It's 777!!! Join Date: Dec 2007 Location: Lake Constance Posts: 64 Real Name: Cee-Jay Main Seven: RG2127 relic Main ERG: Herc Fede custom Rig: VHT Deliverance Thanked: 0	its the uv 777 neck... the green one i had a look on the jemsite article... pooh! thats not going to be a sunday afternoon walkaround...

12-17-2007, 11:55 AM	#8 (permalink)
eelblack2 H8ing Non Customs Join Date: Aug 2006 Location: Boca Raton, FL Posts: 1,240 Real Name: Lee Main Seven: CS ESP's, LACS, KXK Main ERG: RG2228 Rig: JMP1>Triaxis>9100 Thanked: 6	If you end up not using that Green Dot neck, let me know by all means, Ill buy it off you. I cant get enough old UV necks.

12-17-2007, 05:53 PM	#9 (permalink)
c4tze 666? It's 777!!! Join Date: Dec 2007 Location: Lake Constance Posts: 64 Real Name: Cee-Jay Main Seven: RG2127 relic Main ERG: Herc Fede custom Rig: VHT Deliverance Thanked: 0	hihi, sorry but i think im getting that neck anyway... worst case scenario: warmoth replacement body


	Powered by vBulletin 3.7.3 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. LinkBacks Enabled by vBSEO 3.1.0 "777" Logo © Darren Wilson Content © 2008 Sevenstring.org LLC - Privacy Policy Affiliate Links Directory

» Sevenstring Guitars

AANJ body @ non-AANJ neck?