[djpharoah]

Originally Posted by Jeff

Also, if you're the guy leaving Xtremevillan neg reps, how about owning up to it and leaving your name?

Thanks for your concern - but I didnt leave neg feedback for him. I have cleared it out with Matt as well. I would thank you to stop implying I did.

[Jeff]

Originally Posted by djpharoah

Thanks for your concern - but I didnt leave neg feedback for him. I have cleared it out with Matt as well. I would thank you to stop implying I did.

I wasn't concerned.

[The Hiryuu]

MAPLE!

Although I'll readily admit I won't buy one because I'm broke.

[Edroz]

Originally Posted by kurtzentmaier

Ok, so here is the final list (??) of specs... until we change them again..

Neck: 5 piece maple neck-thu body construction
Mahoganny arch top body (wings)
27" scale
Pickups: Passive Agile
24 frets 6100 Jumbo (.110" x .055)
13.7" (350mm) radius
Grover Die Cast tuners (black) 102-18B
String - thru body bridge (Gotoh) - tune-o-matic - no trem!
Graphite Nut
1 Vol 1 tone - passive Agile pickups
Reverse Headstock
Width of the neck at the nut: 1 7/8"; at the 22st fret: 2 3/16"
Uniform Neck Profile - 21.5mm at the frest fret and 22mm at the 12th fret.

Neck - Ebony or Maple fretboard with no markers except offset side dot at 12th fret (like PS-4000)
Position markers are located on the side of the neck.

Colors

Tribal Purple - Maple Neck
Tribal Blue - Maple Neck
Tribal Green Ebony Neck
Black Flame - Ebony Neck

i'm assuming from this post from Kurt, he's offering BOTH maple and ebony fretboards? i guess this is all we need to verify with Kurt at this point. since all the other specs work great for me and a few others.



EDIT : oops, wrong thread

[ShawnFjellstad]

Originally Posted by Edroz

i'm assuming from this post from Kurt, he's offering BOTH maple and ebony fretboards? i guess this is all we need to verify with Kurt at this point. since all the other specs work great for me and a few others.

sounds like it.

if i have any money left over after the custom, i think i might grab one of the blue/maple ones. that mockup in the other thread looks teh secks.

[Xtremevillan]

Pfft, you'll have to wait until I buy one.



..


please.

<_<

[NuSkoolTone]

Originally Posted by Rich

I'd love one in white with a maple fretboard, that would be awesome.

I'd want Ebony, but I would DROOL for a Gloss white with Body Binding, or at least a scraped edge binding.

Watching these interceptor threads very closely...

[ShawnFjellstad]

Originally Posted by NuSkoolTone

I'd want Ebony, but I would DROOL for a Gloss white with Body Binding, or at least a scraped edge binding.

Watching these interceptor threads very closely...

i'm fairly sure that kurt isn't going to offer a gloss white for this run of septor pros, but you could probably order a custom one.

Originally Posted by Xtremevillan

Pfft, you'll have to wait until I buy one.



..


please.

<_<

DO WANT.

[Xtremevillan]

In the other topic he said he will have those 5 (green purple blue) as reserved sample ones, if the samples are good, he will expand the color.

For now, purple maple fretboard is all I need.

[ShawnFjellstad]

Originally Posted by Xtremevillan

In the other topic he said he will have those 5 (green purple blue) as reserved sample ones, if the samples are good, he will expand the color.

For now, purple maple fretboard is all I need.

well, he seems to have added one more option.
now he's offering black flame with ebony or maple.