TonePros Clips

Metal Ken · 09-16-2005, 03:50 AM

Hey all,
I was messing around with my bridge on my schecter (TonePros Locking 7 Bridge) -- All the little saddles face the same way, i wanted to flip the lower side (D-B) backwards For sake of a bit more intonation room. And it looks cool. So i started on the Low B, i pulled out that little Clip. The fucker Broke. Spent 2 Hours trying to fashion another one out of a coat hanger, pen spring and use what was left of the original. So now i'm semi-SOL. TonePro's has no # listed on their site. I cant find shit about the things... I'm gonna call schecter & WD parts tomorrow and stop up at Sam Ash & See if they have anything..
This sucks :/

The Dark Wolf · 09-16-2005, 05:15 AM

That sucks big time, dude. I feel for you.

Doctor J · 09-16-2005, 06:14 AM

I was setting the intonation on my C7 last night, coincidentaly enough. I though it was odd that all the saddles were the facing the same way but could intonate correctly without taking it apart, so I left it alone. Glad I did now.

That's a tough break man, hope you're sorted sonn enough.

darren · 09-16-2005, 11:10 AM

The TonePros bridges are just modified Korean-made Tune-O-Matic bridges, so any replacement parts for similar bridges should work.

Metal Ken · 09-16-2005, 02:37 PM

Update: TonePros rules. they're sending me a new BRIDGE free of charge \m/

Metal Ken · 09-16-2005, 03:27 PM

For you other guys w/ Schecters:

Quote:

Originally Posted by TonePros

Okayy.... the model bridge on you Schecter Black Jack is probably a TonePros Model T3BT, this particular model has the most intonation room of any "Nashville Style" bridge available because the saddles are permanently "clipped" from the outside of the bridge instead of inside. Chances are if you needed more intonation room somehow, this would probably mean a simple truss rod adjustment rather than dismantling the bridge to turn saddles around. We still though back our & Schecter customers 100%. Even though it would normally void the warranty to "crack" the clips off the back of the bridge, we will take care of you by shipping you a replacement T3BT bridge at no charge. Please keep in mind that the new model
We look forward to hearing from you soon!

There you have it.

Doctor J · 09-16-2005, 07:11 PM

Very impressive. Kudos to them!

09-16-2005, 03:50 AM	#1
Metal Ken Dissident Aggressor • Super Moderator • Join Date: Jun 2004 Location: Florida Posts: 16,452 Real Name: Legion Main Seven: Loomis, C7HR, Giannini 7 Rig: Mesa Rectoverb 50 Thanked: 73	TonePros Clips Hey all, I was messing around with my bridge on my schecter (TonePros Locking 7 Bridge) -- All the little saddles face the same way, i wanted to flip the lower side (D-B) backwards For sake of a bit more intonation room. And it looks cool. So i started on the Low B, i pulled out that little Clip. The fucker Broke. Spent 2 Hours trying to fashion another one out of a coat hanger, pen spring and use what was left of the original. So now i'm semi-SOL. TonePro's has no # listed on their site. I cant find shit about the things... I'm gonna call schecter & WD parts tomorrow and stop up at Sam Ash & See if they have anything.. This sucks :/ Almighty asmodeus, existant of chaos Ominous be thy name Thy kingdom come on earth Lead me into all temptation of my flesh So I may trespass greatly into Thy ways by my desires ~Fornicatus Benefictus http://www.myspace.com/impurity Brutal Skullfucking Death Metal

09-16-2005, 05:15 AM	#2
The Dark Wolf *Canis lupis obscurus* • Super Moderator • Join Date: Apr 2005 Location: Toledo, Ohio. USA Posts: 15,265 Real Name: Bob Main Seven: 2001 Ibanez RG2027XVV Main ERG: Ibanez SR505 Rig: GNX/Magicstomp Thanked: 92	That sucks big time, dude. I feel for you. http://www.wolf.org

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need EMG 707 clips	777	Pickups, Electronics & General Tech	5	09-30-2006 08:14 PM
Blaze vs. X2N clips	LordOVchaoS	Pickups, Electronics & General Tech	53	08-22-2006 11:50 AM
Some New Clips	eleven59	Recording Studio	4	01-05-2006 05:36 PM
a few short clips	Jibboom	Recording Studio	3	12-28-2005 03:34 AM
Anybody know where to grab a 7-string tonepros bridge?	Drache713	Sevenstring Guitars	15	09-27-2005 05:52 PM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

09-16-2005, 06:14 AM	#3
Doctor J I Don't Own An Ibanez 7! Join Date: Jul 2005 Location: Dublin, Ireland Posts: 93 Main Seven: Schecter C7 Blackjack, Conklin GTG-7T Rig: Ampeg VH140C Thanked: 0	I was setting the intonation on my C7 last night, coincidentaly enough. I though it was odd that all the saddles were the facing the same way but could intonate correctly without taking it apart, so I left it alone. Glad I did now. That's a tough break man, hope you're sorted sonn enough.

09-16-2005, 11:10 AM	#4
darren Mr. Negative Pants™ Join Date: Oct 2004 Location: Greater Toronto Area, Canada Posts: 8,084 Main Seven: modded Dean EVO Special 7 Main ERG: Agile Intrepid Standard Rig: Mesa F-30 -> Thiele Thanked: 42	The TonePros bridges are just modified Korean-made Tune-O-Matic bridges, so any replacement parts for similar bridges should work.

09-16-2005, 02:37 PM	#5
Metal Ken Dissident Aggressor • Super Moderator • Join Date: Jun 2004 Location: Florida Posts: 16,452 Real Name: Legion Main Seven: Loomis, C7HR, Giannini 7 Rig: Mesa Rectoverb 50 Thanked: 73	Update: TonePros rules. they're sending me a new BRIDGE free of charge \m/

09-16-2005, 07:11 PM	#7
Doctor J I Don't Own An Ibanez 7! Join Date: Jul 2005 Location: Dublin, Ireland Posts: 93 Main Seven: Schecter C7 Blackjack, Conklin GTG-7T Rig: Ampeg VH140C Thanked: 0	Very impressive. Kudos to them!


	Powered by vBulletin 3.7.3 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. Search Engine Optimization by vBSEO 3.2.0 "777" Logo © Darren Wilson Privacy Policy Affiliate Links Directory

» Sevenstring Guitars

TonePros Clips