Getting a baritone neck for my S7320, but where and what to consider?

sakeido · 05-30-2007, 01:39 PM

I just got my S7320 in yesterday and put the M7 in it and all, and it is pretty sick as is. But, it "overlaps" with my JP7 too much - I want each of my guitars to have its own unique role and sound so that I can actually justify having more then one guitar. The JP7 is too brilliant to mess with so the S7320 is going to get a fancy new neck

I think urklvt has a S7420 with a 28.5" scale neck (two additional frets on the bottom of the guitar), which is cool, because then I can tune down to F# with no issues

so I was looking for a 28.5" scale too.

But then I worry about the ZR trem. Will it still zero properly? Will it require extensive messing around with the spring tension? Intonation issues? Can it even accept a .68 low string in the saddle? Should I just tremol-no it?

And who can build me this neck? I can't say I like the profile the S7320 that much, or how cheap the neck feels (the fretwork is slick though), so I was going to go for a bit fancier 3 or 5 piece neck that has the same width and profile as my JP7's neck, and definitely an ebony fretboard and Dunlop 6100 super jumbo frets. I'm tired of trying to deal with Chris Woods so I was hoping there were other alternatives for guys who could build me an Ibby neck of this sort.

Metal Ken · 05-30-2007, 01:41 PM

I dunno if it can fit a 68 but i dont see why having a different neck would affect the trem

sakeido · 05-30-2007, 01:49 PM

I guess it is not so much the different neck that would affect the trem but the different tension from slapping fat strings on it and then detuning it big time.

Metal Ken · 05-30-2007, 02:07 PM

I dont see how, if you put big strings on and tune way low, its not much more tension than putting on regular strings in a regular tuning.

sakeido · 05-30-2007, 04:54 PM

Hmm never mind that then. Who's good for making custom necks?

OzzyC · 05-30-2007, 04:56 PM

It's 28.625"

Metal Ken · 05-30-2007, 05:40 PM

Quote:

Originally Posted by sakeido

Hmm never mind that then. Who's good for making custom necks?

Im pretty sure Dolan made Urklvt's.

Unknown Doodl3.2 · 05-30-2007, 06:02 PM

good luck fitting a tremol-no in a ZR

... technically you shouldn't have to though since the ZR does *similar* stuff...

Durero · 05-30-2007, 06:37 PM

Try Mike Sherman

sakeido · 05-30-2007, 06:49 PM

Quote:

Originally Posted by Unknown Doodl3.2

good luck fitting a tremol-no in a ZR

... technically you shouldn't have to though since the ZR does *similar* stuff...

I forgot about that

I have zero knowledge about trems, really. Thanks for the guitar again man!

05-30-2007, 01:39 PM	#1
sakeido Is a Pastafarian Join Date: Jul 2006 Location: Calgary AB Posts: 4,201 Real Name: Cody Main Seven: COW7 Silverburst Main ERG: 2077XL Rig: Invader/AxeFX/Orange Thanked: 223	Getting a baritone neck for my S7320, but where and what to consider? I just got my S7320 in yesterday and put the M7 in it and all, and it is pretty sick as is. But, it "overlaps" with my JP7 too much - I want each of my guitars to have its own unique role and sound so that I can actually justify having more then one guitar. The JP7 is too brilliant to mess with so the S7320 is going to get a fancy new neck I think urklvt has a S7420 with a 28.5" scale neck (two additional frets on the bottom of the guitar), which is cool, because then I can tune down to F# with no issues so I was looking for a 28.5" scale too. But then I worry about the ZR trem. Will it still zero properly? Will it require extensive messing around with the spring tension? Intonation issues? Can it even accept a .68 low string in the saddle? Should I just tremol-no it? And who can build me this neck? I can't say I like the profile the S7320 that much, or how cheap the neck feels (the fretwork is slick though), so I was going to go for a bit fancier 3 or 5 piece neck that has the same width and profile as my JP7's neck, and definitely an ebony fretboard and Dunlop 6100 super jumbo frets. I'm tired of trying to deal with Chris Woods so I was hoping there were other alternatives for guys who could build me an Ibby neck of this sort. _________________________ "Ah, she's built like a steakhouse but she handles like a bistro" - ZB My Soundclick Page

05-30-2007, 01:41 PM	#2
Metal Ken Dissident Aggressor • Super Moderator • Join Date: Jun 2004 Location: Florida Posts: 16,452 Real Name: Legion Main Seven: Loomis, C7HR, Giannini 7 Rig: Mesa Rectoverb 50 Thanked: 73	I dunno if it can fit a 68 but i dont see why having a different neck would affect the trem Almighty asmodeus, existant of chaos Ominous be thy name Thy kingdom come on earth Lead me into all temptation of my flesh So I may trespass greatly into Thy ways by my desires ~Fornicatus Benefictus http://www.myspace.com/impurity Brutal Skullfucking Death Metal

05-30-2007, 04:56 PM	#6
OzzyC :ubersquint: Join Date: Sep 2006 Location: USA Posts: 3,358 Real Name: AntonioPetrucci Main Seven: RG1527RB Main ERG: I can has ERG? Rig: GNX3000 Thanked: 17	It's 28.625" You've got your head down You've got your eyes closed You look so pitiful now Your body encrusted with ash Breath heavy with toxins Hair singed and matted Clothes frayed and burnt You are left with nothing

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

05-30-2007, 01:49 PM	#3
sakeido Is a Pastafarian Join Date: Jul 2006 Location: Calgary AB Posts: 4,201 Real Name: Cody Main Seven: COW7 Silverburst Main ERG: 2077XL Rig: Invader/AxeFX/Orange Thanked: 223	I guess it is not so much the different neck that would affect the trem but the different tension from slapping fat strings on it and then detuning it big time.

05-30-2007, 02:07 PM	#4
Metal Ken Dissident Aggressor • Super Moderator • Join Date: Jun 2004 Location: Florida Posts: 16,452 Real Name: Legion Main Seven: Loomis, C7HR, Giannini 7 Rig: Mesa Rectoverb 50 Thanked: 73	I dont see how, if you put big strings on and tune way low, its not much more tension than putting on regular strings in a regular tuning.

05-30-2007, 04:54 PM	#5
sakeido Is a Pastafarian Join Date: Jul 2006 Location: Calgary AB Posts: 4,201 Real Name: Cody Main Seven: COW7 Silverburst Main ERG: 2077XL Rig: Invader/AxeFX/Orange Thanked: 223	Hmm never mind that then. Who's good for making custom necks?

05-30-2007, 06:02 PM	#8
Unknown Doodl3.2 look at each other.. Join Date: Oct 2005 Location: Montreal Posts: 2,271 Real Name: Claude Rig: Mark III -> Vader Thanked: 21 $Unknown Doodl3.2 is rather kvlt and tr00. \m/$ $Unknown Doodl3.2 is rather kvlt and tr00. \m/$ $Unknown Doodl3.2 is rather kvlt and tr00. \m/$ $Unknown Doodl3.2 is rather kvlt and tr00. \m/$ $Unknown Doodl3.2 is rather kvlt and tr00. \m/$ $Unknown Doodl3.2 is rather kvlt and tr00. \m/$ $Unknown Doodl3.2 is rather kvlt and tr00. \m/$	good luck fitting a tremol-no in a ZR ... technically you shouldn't have to though since the ZR does similar stuff...

05-30-2007, 06:37 PM	#9
Durero prototyping... Join Date: Dec 2005 Location: Vancouver, B.C., Canada Posts: 3,744 Real Name: Leo Pedersen Main Seven: Raven 7 - my design Main ERG: Ergo 10, Ergo 9, Stick 8 Rig: 2101LTD>TS100>2x1936 Thanked: 36	Try Mike Sherman


	Powered by vBulletin 3.7.3 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. Search Engine Optimization by vBSEO 3.2.0 "777" Logo © Darren Wilson Privacy Policy Affiliate Links Directory

» Sevenstring Guitars

Getting a baritone neck for my S7320, but where and what to consider?