Update photos of my RG7620 re-finish + Rusty Cooley Mod.

Allen Garrow · 05-15-2007, 09:56 PM

That's cool! Paul Gilbert did the exact same thing with his 7 string. I may have to try that. It makes room for some big stretches. Nice work.

~A

Michael · 05-15-2007, 10:06 PM

Good work!

Was the cutaway hard to do?

jtm45 · 05-15-2007, 10:10 PM

That colour looks awesome Tony

Nice work dude!
Can't wait to see it finished.You gonna' do the headstock too or leave it black ?

It's not quite as shiny (mirror-like)as i was expecting but it doesn't look any the worse for it.That's THE shade of blue!

What's the score with the Acrylic catalyser and all that stuff then?

guitarplayerone · 05-16-2007, 01:35 PM

Quote:

Originally Posted by Allen Garrow

That's cool! Paul Gilbert did the exact same thing with his 7 string. I may have to try that. It makes room for some big stretches. Nice work.

~A

paul gilbert has a 7 string?
pics please?

TonyFlyingSquirrel · 05-16-2007, 01:48 PM

I didn't know Paul Gilbert had or was playing a 7 now.

The deeper part of the cutaway was done after drawing out the area to be cut, then refining it so the curves & such appeared more smooth, then I cut them out with my scroll saw, as I do not yet have a band saw, but I did it very slowly. The back of the cutaway just involved using a file to rough down the back of the cutaway & keep it flat, then I used my Ryobi Orbital sander to smooth it up once I had the rest of the body stripped. To sand out the inside of the cutaway, both for stripping & fine sanding, I wrapped various grits of sandpaper around a 5/8 socket wrench & sanded the inside, that way the inner surface of the cutaways would remain flat.

I won't be shiny-mirror like until it has been buffed out. In fact, after you level sand, the guitar is quite dingy looking, the buffing is where it comes to life. I'm just a bit away from that still.

Catalyst Acrylic is a Acrylic finish, mixed in with a catalyzer, or "hardener". The components can be found at any Sherman Williams. Using a Preval Spray Gun - Home & mixing the components as recommended by the manufacturer.

My TFS6 has a translucent red catalyst acrylic finish, & for over 11 years now, it has stood the test of time with over 400 shows, 1500 rehearsals, & a few dozen worship services. It gets a lot of use & the finish holds up far better than nitrocelluose in my opinion.

The Headstock is going to remain black, I didn't want to have to fool with re-applying the Ibby Logo.

Donnie · 05-16-2007, 02:54 PM

Quote:

Originally Posted by guitarplayerone

paul gilbert has a 7 string?
pics please?

Here's a video of him playing it: YouTube - Paul Gilbert

Btw, Tony... Hurry up and get that thing finished!

TonyFlyingSquirrel · 05-16-2007, 03:02 PM

It is similar.

That's interesting, he's tuned DDDCFAD.

Thanks for sharing that.

the.godfather · 05-16-2007, 03:22 PM

Quote:

Originally Posted by Donnie

Here's a video of him playing it: YouTube - Paul Gilbert

Paul Gilbert never ceases to amaze me, he is just amazing. That's why he is my all-time favourite player. I mean DDDCFAD? And he still shreds his ass off using it. Nice guy too when I met him.

Metal Ken · 05-16-2007, 03:26 PM

Quote:

Originally Posted by TonyFlyingSquirrel

It is similar.

That's interesting, he's tuned DDDCFAD.

Thanks for sharing that.

Same principle on the "get out of my yard" intro, its just the top 3 strings of the guitar tuned to "E" in different octaves.

05-15-2007, 09:56 PM	#31
Allen Garrow Famous Beaver Hunter Join Date: Apr 2005 Location: Nashville TN Posts: 1,278 Main Seven: Ibanez RG1527 Rig: Digitech Valve FX Thanked: 6	That's cool! Paul Gilbert did the exact same thing with his 7 string. I may have to try that. It makes room for some big stretches. Nice work. ~A Come sopra, dunque di sotto. Fare che lei farà, e nuoce nessuno.

05-16-2007, 01:48 PM	#35
TonyFlyingSquirrel Warmoth Sales Join Date: May 2006 Location: Puyallup, Washington: www.warmoth.com Posts: 1,242 Real Name: Flying Squirrel Main Seven: IBANEZ RG7620RB Rig: L6PXTL/TFS6/RG7620RB Thanked: 35 $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$	I didn't know Paul Gilbert had or was playing a 7 now. The deeper part of the cutaway was done after drawing out the area to be cut, then refining it so the curves & such appeared more smooth, then I cut them out with my scroll saw, as I do not yet have a band saw, but I did it very slowly. The back of the cutaway just involved using a file to rough down the back of the cutaway & keep it flat, then I used my Ryobi Orbital sander to smooth it up once I had the rest of the body stripped. To sand out the inside of the cutaway, both for stripping & fine sanding, I wrapped various grits of sandpaper around a 5/8 socket wrench & sanded the inside, that way the inner surface of the cutaways would remain flat. I won't be shiny-mirror like until it has been buffed out. In fact, after you level sand, the guitar is quite dingy looking, the buffing is where it comes to life. I'm just a bit away from that still. Catalyst Acrylic is a Acrylic finish, mixed in with a catalyzer, or "hardener". The components can be found at any Sherman Williams. Using a Preval Spray Gun - Home & mixing the components as recommended by the manufacturer. My TFS6 has a translucent red catalyst acrylic finish, & for over 11 years now, it has stood the test of time with over 400 shows, 1500 rehearsals, & a few dozen worship services. It gets a lot of use & the finish holds up far better than nitrocelluose in my opinion. The Headstock is going to remain black, I didn't want to have to fool with re-applying the Ibby Logo. WWW.MYSPACE.COM/TONYFLYINGSQUIRRELMUSIC http://www.soundclick.com/bands/page...?bandID=268162 Please direct all Warmoth related inquiries directly to Warmoth, here's that link; http://www.warmoth.com/customerservice/customer.cfm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rusty Cooley Dean	NDG	Sevenstring Guitars	142	09-19-2007 01:25 PM
Rusty Cooley wanking off...	Oguz286	General Music Discussion	26	07-11-2006 12:38 PM
Rusty Cooley Forums	guitarjitsumaster	General Music Discussion	23	05-30-2006 10:08 AM
Rusty Cooley Ibanez 8?	God Hand Apostle	Extended Range Guitars	42	12-09-2005 02:20 AM
New Rusty Cooley clips!	XIEmperorIX	General Music Discussion	52	10-01-2005 11:00 AM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

05-15-2007, 10:06 PM	#32
Michael No More Mr. Nice Guy Join Date: Aug 2005 Location: Geelong, Victoria, Australia Posts: 7,719 Real Name: Michael Main Seven: '97 UV7BK Rig: ADA MP1 > Mesa 50/50 Thanked: 49	Good work! Was the cutaway hard to do?

05-15-2007, 10:10 PM	#33
jtm45 ss.org Regular Join Date: May 2005 Location: Hoshino,South Wales,U.K. Posts: 2,056 Real Name: Dave Main Seven: RG2027xvv Thanked: 19	That colour looks awesome Tony Nice work dude! Can't wait to see it finished.You gonna' do the headstock too or leave it black ? It's not quite as shiny (mirror-like)as i was expecting but it doesn't look any the worse for it.That's THE shade of blue! What's the score with the Acrylic catalyser and all that stuff then?

05-16-2007, 03:02 PM	#37
TonyFlyingSquirrel Warmoth Sales Join Date: May 2006 Location: Puyallup, Washington: www.warmoth.com Posts: 1,242 Real Name: Flying Squirrel Main Seven: IBANEZ RG7620RB Rig: L6PXTL/TFS6/RG7620RB Thanked: 35 $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$	It is similar. That's interesting, he's tuned DDDCFAD. Thanks for sharing that.


	Powered by vBulletin 3.7.3 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. Search Engine Optimization by vBSEO 3.2.0 "777" Logo © Darren Wilson Privacy Policy Affiliate Links Directory

» Sevenstring Guitars

Update photos of my RG7620 re-finish + Rusty Cooley Mod.