Stopping track bleed through w/ cubase

7 Strings of Hate · 02-15-2008, 06:42 PM

hey guys, i'v been having a problem with my drum track bleeding through onto my audio tracks, ontop of which, they dont perfectly sync up, if it was just the audio, its so minute you wouldnt even notice, but with the drum track bleeding through, the latency makes a delay on the drum track. I would just leave it and sync up the tracks, but i dont know how to edit the tracks in cubase, it seems like they are block orientated and i cant take a 2/10ths of a second out to sync them. Hizzelp

7 Strings of Hate · 02-16-2008, 10:01 AM

no one?

7 Strings of Hate · 02-16-2008, 05:35 PM

u guys suck

Stitch · 02-16-2008, 05:51 PM

Try rephrasing your first post. I can't actually understand what the hell the problem is.

7 Strings of Hate · 02-17-2008, 08:16 PM

ok, basically, when i record a track, then listen to it and try to record another track at the same time, it picks up the original track in addition to what i'm currently recording.
example, i lay out the midi drums, then make a audio track to record a guitar, but when i record the guitar, if i listen to the drums at the same time, it catches the guitar but it also catches the drums for a second time. And so on for each track. How do i stop the bleed through?

smueske · 02-17-2008, 08:37 PM

I don't use Cubase, but it sounds like you have the new tracks set to "record output" instead of "input".

theunforgiven246 · 02-17-2008, 08:39 PM

how bad is the bleed? if its really loud then the track isnt set up properly, if its real quiet in the background a mic picked up the sound.

7 Strings of Hate · 02-17-2008, 10:28 PM

its loud, but i'm not micing, its a direct in

BigM555 · 02-17-2008, 11:49 PM

Yup, you definitely have something wrong in your routing.

I don't have Cubase up right now and it's been a while but check your input as unforgiven suggests.

cow 7 sig · 02-18-2008, 03:40 AM

try turning off the snap too as well to help with the 2/10th cut/past lining up side of things.had that trouble myself.

02-15-2008, 06:42 PM	#1
7 Strings of Hate Mid-Level Asshole Join Date: Jan 2007 Location: St.Louis USA Posts: 3,492 Real Name: Chris Main Seven: Ibanez S7320+Blackouts Main ERG: Intrepid Pro 8 Rig: Mesa Rectoverb Head Thanked: 45	Stopping track bleed through w/ cubase hey guys, i'v been having a problem with my drum track bleeding through onto my audio tracks, ontop of which, they dont perfectly sync up, if it was just the audio, its so minute you wouldnt even notice, but with the drum track bleeding through, the latency makes a delay on the drum track. I would just leave it and sync up the tracks, but i dont know how to edit the tracks in cubase, it seems like they are block orientated and i cant take a 2/10ths of a second out to sync them. Hizzelp Confront and Destroy! -7SoH http://www.myspace.com/7stringsofhate

02-17-2008, 08:37 PM	#6
smueske ss.org Regular Join Date: Jul 2005 Location: Midwest Posts: 587 Main Seven: Carvin 727 Rig: Axsys II Thanked: 5	I don't use Cubase, but it sounds like you have the new tracks set to "record output" instead of "input". Steve http://myspace.com/stevemueske

02-17-2008, 08:39 PM	#7
theunforgiven246 BEHOLD KLUMPAMUS PRIME! Join Date: Apr 2005 Location: Ohio Posts: 1,370 Real Name: John Main Seven: Ibanez RG 7621 Rig: 5150 combo and vsts Thanked: 13	how bad is the bleed? if its really loud then the track isnt set up properly, if its real quiet in the background a mic picked up the sound. my girlfriend says i'm totally METAL! balls.

02-18-2008, 03:40 AM	#10
cow 7 sig AU director / RHLC © Join Date: May 2007 Location: bunbury, west australia Posts: 1,045 Real Name: mike Main Seven: JACKSON C O W 7 + RG1527 Main ERG: ESP STEF B8 Rig: x3live into jcm800 Thanked: 5	try turning off the snap too as well to help with the 2/10th cut/past lining up side of things.had that trouble myself. do you have a fetish for reverse heads stocks?,do you find your self sweating or drooling over the site of a reverse head stock? if the answer is yes then i can help with therapy and rehab.join RHLC to feel normal again

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

02-16-2008, 10:01 AM	#2
7 Strings of Hate Mid-Level Asshole Join Date: Jan 2007 Location: St.Louis USA Posts: 3,492 Real Name: Chris Main Seven: Ibanez S7320+Blackouts Main ERG: Intrepid Pro 8 Rig: Mesa Rectoverb Head Thanked: 45	no one?

02-16-2008, 05:35 PM	#3
7 Strings of Hate Mid-Level Asshole Join Date: Jan 2007 Location: St.Louis USA Posts: 3,492 Real Name: Chris Main Seven: Ibanez S7320+Blackouts Main ERG: Intrepid Pro 8 Rig: Mesa Rectoverb Head Thanked: 45	u guys suck

02-16-2008, 05:51 PM	#4
Stitch Join Date: Aug 2005 Location: Edinburgh, Scotland Posts: 6,894 Real Name: Simon Main Seven: Ibanez RG7420 & S7420FMTW Main ERG: Orion OG8 Rig: Peavey 6505 Thanked: 110	Try rephrasing your first post. I can't actually understand what the hell the problem is.

02-17-2008, 08:16 PM	#5
7 Strings of Hate Mid-Level Asshole Join Date: Jan 2007 Location: St.Louis USA Posts: 3,492 Real Name: Chris Main Seven: Ibanez S7320+Blackouts Main ERG: Intrepid Pro 8 Rig: Mesa Rectoverb Head Thanked: 45	ok, basically, when i record a track, then listen to it and try to record another track at the same time, it picks up the original track in addition to what i'm currently recording. example, i lay out the midi drums, then make a audio track to record a guitar, but when i record the guitar, if i listen to the drums at the same time, it catches the guitar but it also catches the drums for a second time. And so on for each track. How do i stop the bleed through?

02-17-2008, 10:28 PM	#8
7 Strings of Hate Mid-Level Asshole Join Date: Jan 2007 Location: St.Louis USA Posts: 3,492 Real Name: Chris Main Seven: Ibanez S7320+Blackouts Main ERG: Intrepid Pro 8 Rig: Mesa Rectoverb Head Thanked: 45	its loud, but i'm not micing, its a direct in

02-17-2008, 11:49 PM	#9
BigM555 I SS.org Salute You! Join Date: Dec 2006 Location: Ontario, Canada Posts: 1,616 Real Name: Mike Main Seven: RWG RG777 Rig: GP100 -> MESA 20/20 Thanked: 26	Yup, you definitely have something wrong in your routing. I don't have Cubase up right now and it's been a while but check your input as unforgiven suggests.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bleed For Sorrow	bobbyretelle	General Music Discussion	5	10-03-2007 05:58 AM
New low tuned almost-song for your consumption! First track in Cubase	sakeido	Recording Studio	12	04-01-2007 06:31 PM
Bleed the Sky	omentremor	General Music Discussion	2	03-29-2007 12:33 AM
Bleed The Sky	CL7	General Music Discussion	4	03-01-2006 05:20 PM


	Powered by vBulletin 3.7.3 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. Search Engine Optimization by vBSEO 3.2.0 "777" Logo © Darren Wilson Privacy Policy Affiliate Links Directory

» Recording Studio

Stopping track bleed through w/ cubase