Simple single coil mounting question

turmoil · 03-18-2008, 04:39 PM

i have a guitar similar to this one

it has no pickguard and i have to install 2 single coil pickups, one in the neck and one in the middle, but what do i need to mount them since there is no pickguard?

i bought the guitar without the single coils installed so i need to buy the hardware/parts somewhere online. I'm assuming maybe it's just some springs and some screws. also, could i mount the humbucker in the same manner, without a pickup ring?

thanks!

MF_Kitten · 03-18-2008, 05:31 PM

it´s usually screws and a foam pad instead of springs.

you could direct mount your humbuckers, but if it´s not routed to do so, it might not work out that well... depends heavily on the route that you´ve got under the humbucker, and it would leave holes from the pickup ring screws too.

turmoil · 03-18-2008, 06:18 PM

yeah, i was reading on stew mac and they have a kit for single coils/humbucker direct mounts that use two long screws and a rubber hose as a spring i believe. i'll have to look and see about the foam pad.

yeah, i'll have to see about the humbucker. i'd like to mount it like that but i don't want to route the body to make it work.

giannifive · 03-18-2008, 06:48 PM

For single coils, these are what you want:

Single-coil Pickup Height Springs at Stewart-MacDonald

With a long-ish screw, of course.

You can generally use the same springs to mount humbuckers, from what I've heard.

	sevenstring guitars		sevenstring registry		photo gallery		merch

03-18-2008, 04:39 PM	#1 (permalink)
turmoil l0rd of teh shr3d Join Date: Oct 2006 Location: Philadelphia Posts: 669 Real Name: George Main Seven: squier stagemaster-7OMGZ! Main ERG: i like to call it 'woody' Rig: ENGL pball --> Mesa Thanked: 15	Simple single coil mounting question i have a guitar similar to this one it has no pickguard and i have to install 2 single coil pickups, one in the neck and one in the middle, but what do i need to mount them since there is no pickguard? i bought the guitar without the single coils installed so i need to buy the hardware/parts somewhere online. I'm assuming maybe it's just some springs and some screws. also, could i mount the humbucker in the same manner, without a pickup ring? thanks!

03-18-2008, 05:31 PM	#2 (permalink)
MF_Kitten T'IS MAH KITTAY! Join Date: Apr 2007 Location: Norway Posts: 1,766 Real Name: Morten Main Seven: Schecter Omen 7 Extreme Main ERG: Agile 28" baritone Rig: Pod X3 Live Thanked: 69	it´s usually screws and a foam pad instead of springs. you could direct mount your humbuckers, but if it´s not routed to do so, it might not work out that well... depends heavily on the route that you´ve got under the humbucker, and it would leave holes from the pickup ring screws too. -------------------------------------- Æn Æppl Æ Dæi, Kiips De Dåktor Awæi

03-18-2008, 06:48 PM	#4 (permalink)
giannifive Occasional Poster Join Date: May 2005 Location: IL, USA Posts: 1,055 Real Name: John Main Seven: RG7621 w/ Blazes Rig: Vox AD15VT Thanked: 9 $giannifive is rather kvlt and tr00. \m/$ $giannifive is rather kvlt and tr00. \m/$ $giannifive is rather kvlt and tr00. \m/$ $giannifive is rather kvlt and tr00. \m/$ $giannifive is rather kvlt and tr00. \m/$ $giannifive is rather kvlt and tr00. \m/$ $giannifive is rather kvlt and tr00. \m/$	For single coils, these are what you want: Single-coil Pickup Height Springs at Stewart-MacDonald With a long-ish screw, of course. You can generally use the same springs to mount humbuckers, from what I've heard. You want the string to vibrate, that's a key component in how you get a great sound in my opinion. --zimbloth (completely out of context)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

03-18-2008, 06:18 PM	#3 (permalink)
turmoil l0rd of teh shr3d Join Date: Oct 2006 Location: Philadelphia Posts: 669 Real Name: George Main Seven: squier stagemaster-7OMGZ! Main ERG: i like to call it 'woody' Rig: ENGL pball --> Mesa Thanked: 15	yeah, i was reading on stew mac and they have a kit for single coils/humbucker direct mounts that use two long screws and a rubber hose as a spring i believe. i'll have to look and see about the foam pad. yeah, i'll have to see about the humbucker. i'd like to mount it like that but i don't want to route the body to make it work.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wtb: single coil sized humbucker	rx	Gear For Sale / Trade/ Wanted	3	02-28-2008 03:27 PM
Sd blackout single coil.	daniboy	Pickups, Electronics & General Tech	12	01-29-2008 06:09 AM
EMG Single Coil 7's	7 Strings of Hate	Pickups, Electronics & General Tech	37	05-08-2007 04:57 PM
They added a single coil to the PGM	Mastodon	Standard Guitars	14	01-21-2007 06:44 PM
Single-coil pickups...	Vince	General Music Discussion	11	08-02-2004 06:24 PM


	Powered by vBulletin 3.7.2 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. LinkBacks Enabled by vBSEO 3.1.0 "777" Logo © Darren Wilson Content © 2008 Sevenstring.org LLC - Privacy Policy Affiliate Links Directory

» Pickups, Electronics & General Tech

Simple single coil mounting question