[forelander]

Originally Posted by forelander

Actually could someone tell me how far their pups are from the strings, unfretted, and fretted at the highest fret. Separate measurements for neck and bridge would be awesome.

Anyone?

[mjgg6]

Please¡¡¡ Info needed, has anyone installed in an Agile, I want to replace the PU with blackouts.
And... are springs and screws included and blackouts pack? I think that I could not use the ones in my Agile.

Thanks.

[ibznorange]

Just installed em in my 727
Depthwise they fit perfect, and fit perfect into the lower ear (the squarish one with two screws). The top ear (triangle 1 screw) needs just a hair of routing to fit the corners of the tabs.
Theres less work to do installing blackouts than installing dimarzios

[mjgg6]

Originally Posted by ibznorange

Just installed em in my 727
Depthwise they fit perfect, and fit perfect into the lower ear (the squarish one with two screws). The top ear (triangle 1 screw) needs just a hair of routing to fit the corners of the tabs.
Theres less work to do installing blackouts than installing dimarzios

Thanks a lot, then I´ll go for the pack.


Cheers.

[djpharoah]

Originally Posted by mjgg6

Thanks a lot, then I´ll go for the pack.


Cheers.

yuh - I think he meant Carvin DC727 and not the Agile Interceptor/Septor 27" aka "727".

I think that you should still be fine.

[Scarpie]

I just got done restringing my washburn wg 587 and something has to be wrong cause it sounds aweful. i used to have a very clear and crisp sound with old pickups very similar to that of "Demanufacture" or "Burn my Eyes" but now with the blackout, the guitar sounds dry and gritty have like something off of korn's "life is peachy" anyone here that can talk about the kind of tone they have and if my description sounds right. plus i lost alot of articulation in the lower register of the guitar, first six strings cut through just fine, but i have to add alot of mids to play on low A string. never had to do that before. old pickups were alot more balanced in that chords on the seventh string cut through just as easily as chords on the fifth and sixth strings. i don't know!!! i am not too pleased with my experience and wish to know if the pick ups just aren't for me or if i did something wrong.

i am used to changing guitars for tuning variations but with the tone staying consistent, when i plugged this in, it was like wow, do i want to play along to a korn record, or do i want to have my own sound back?

[lowbass5]

hello
i have a RG7321 with stock pickups, i just ordered a bridge SD blackout, can anyone tell me how to make the conections?
i will have to disable de stock neck pickup?
How to make the soldering if i only want to have only the volume pot..no tone pot no pickup switch..just a pickup and a pot.
thanks

[Humanoid]

Originally Posted by lowbass5

hello
i have a RG7321 with stock pickups, i just ordered a bridge SD blackout, can anyone tell me how to make the conections?
i will have to disable de stock neck pickup?
How to make the soldering if i only want to have only the volume pot..no tone pot no pickup switch..just a pickup and a pot.
thanks

Well. The neck pickup may not work right with 25K pots, but there still is a way to use these together.

However, the most simpliest way is just to switch the volume pot and jack, then connect the pickup like in this:
Wiring Diagram

[Metal Ken]

They fit in M-207 LTD's with no modifications required.

[lowbass5]

Originally Posted by Humanoid

Well. The neck pickup may not work right with 25K pots, but there still is a way to use these together.

However, the most simpliest way is just to switch the volume pot and jack, then connect the pickup like in this:
Wiring Diagram

thanks..i didn't find that diagram..thanks a LOT!