For people interested in S7 + Blackouts (or any pup for that matter)

forelander · 03-02-2008, 10:34 PM

I just gutted the electronics on my S7420 in preparation for blackouts and thought people might be interested in the following info.

The depth of the routes on the S7 is around about 10mm. The depth of the stock pups from top to the bottom of the foam pads is approximately 20mm - almost the same as the blackouts, however this includes the height of the wire underneath the pickup. Blackouts are about 22 mm and on top of that you're gonna need to account for the wire. Depending on the wire thickness you might just get away with a direct install but I'm guessing the routes need to be a few mm deeper (probably around 5mm = 1/5").

Hope that is of use to anyone looking at new pups for their S's.

ibznorange · 03-02-2008, 10:59 PM

good to know, thanks

is it possible to run the wire AROUND the pickup? i might be the only person i know who does that, but its just something i thought id ask

Apophis · 03-03-2008, 03:26 PM

Thanks for info

Stitch · 03-04-2008, 07:45 AM

Quote:

Originally Posted by forelander

I just gutted the electronics on my S7420 in preparation for blackouts and thought people might be interested in the following info.

The depth of the routes on the S7 is around about 10mm. The depth of the stock pups from top to the bottom of the foam pads is approximately 20mm - almost the same as the blackouts, however this includes the height of the wire underneath the pickup. Blackouts are about 22 mm and on top of that you're gonna need to account for the wire. Depending on the wire thickness you might just get away with a direct install but I'm guessing the routes need to be a few mm deeper (probably around 5mm = 1/5").

Hope that is of use to anyone looking at new pups for their S's.

VERY useful to know

I demand pics of your S7.

forelander · 03-04-2008, 08:54 PM

When the blackouts are in there will be some more pics. Also, the holes for the pots are 9mm in diameter.

	sevenstring guitars		sevenstring registry		photo gallery		merch

03-02-2008, 10:34 PM	#1 (permalink)
forelander you fail me Join Date: Jul 2005 Location: Australia Posts: 828 Main Seven: S7420FM Rig: 6505+ half stack Thanked: 9	For people interested in S7 + Blackouts (or any pup for that matter) I just gutted the electronics on my S7420 in preparation for blackouts and thought people might be interested in the following info. The depth of the routes on the S7 is around about 10mm. The depth of the stock pups from top to the bottom of the foam pads is approximately 20mm - almost the same as the blackouts, however this includes the height of the wire underneath the pickup. Blackouts are about 22 mm and on top of that you're gonna need to account for the wire. Depending on the wire thickness you might just get away with a direct install but I'm guessing the routes need to be a few mm deeper (probably around 5mm = 1/5"). Hope that is of use to anyone looking at new pups for their S's. Jetzt liegst du hier, ganz regungslos, in meiner hand und meinem schoß, du bist so kalt...

03-02-2008, 10:59 PM	#2 (permalink)
ibznorange Chief Officer/RHLC © Join Date: Aug 2007 Location: AZ Posts: 7,422 Real Name: Max Main Seven: Ir now Sevenless :squint: Main ERG: A Dead Cat Rig: Mesa Rectoverb Combo Thanked: 46	good to know, thanks is it possible to run the wire AROUND the pickup? i might be the only person i know who does that, but its just something i thought id ask Reverse Headstocks or Bust Dude...i just got a spam email that was titled "Funky date rape trick" -Zepp88 I just got another funny email "Her pussy smiled at me" -Zepp88 Don't tell me you haven't heard of Raptor Jesus It's important that you know this information :headnod: It will decide your fate when we are pwned. -JoeOvChaos I was going KAT KAT KAT KAT and you were going KAT... chk... KAT... chk-die. -TomAwesome

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Do I recall people being interested in Sevenstring S models?	Fret Melter	Sevenstring Guitars	73	12-31-2006 10:24 AM
How many people would be interested?	Elysian	Sevenstring Guitars	80	06-17-2006 08:07 PM
Dark Matter	David	General Music Discussion	46	01-03-2006 10:21 AM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

03-03-2008, 03:26 PM	#3 (permalink)
Apophis ROTER CUSTOM GUITARS Join Date: Jan 2005 Location: Poland Posts: 8,350 Real Name: Sebastian Main Seven: I need more strings :) Main ERG: RCG 9 & 10 string Rig: Line6 Thanked: 50	Thanks for info

03-04-2008, 08:54 PM	#5 (permalink)
forelander you fail me Join Date: Jul 2005 Location: Australia Posts: 828 Main Seven: S7420FM Rig: 6505+ half stack Thanked: 9	When the blackouts are in there will be some more pics. Also, the holes for the pots are 9mm in diameter.


	Powered by vBulletin 3.7.2 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. LinkBacks Enabled by vBSEO 3.1.0 "777" Logo © Darren Wilson Content © 2008 Sevenstring.org LLC - Privacy Policy Affiliate Links Directory

» Pickups, Electronics & General Tech

For people interested in S7 + Blackouts (or any pup for that matter)