Wiring help!!!

Hcash · 02-23-2008, 05:12 PM

I E-mailed EMG but they sent me the wrong diagram and after I E-mailed them back they haven't responded... So I need a wiring diagram for one pickup, an EMG afterburner, and a killswitch.

ibznorange · 02-23-2008, 08:56 PM

one PASSIVE pickup btw

Hcash · 02-23-2008, 09:09 PM

Yes, thank you.

Horizon Whore · 02-24-2008, 12:12 AM

Electric Guitar Pickups & Accessories - EMG Pickups | Support thats the only help i can give you mate..

just the wiring diagrams from the site, and something about an afterburner: "Can I use my Afterburner as a volume pot?
No. The AB was designed to be an active EQ accessory, not a volume pot. It performs the same function as the EMG-PA2."

this is probably no help, but best i could do!

Hcash · 02-26-2008, 05:55 PM

The guy at EMG e-mailed me back...

Quote:
"No diagram needed:

1) Connect hot from pup to white wire of AB.
2) Connect ground of pup to black wire of AB.
3) Connect other black wire from AB to middle terminal of EMG jack.
4) Connect green wire of AB to white wire of EMG jack.
5) Connect red wire of AB to red wire of battery clip.
6) Install kill switch on black wire of battery clip.
"

I will assume the "EMG jack" is the output...

And is this the proper way to hook up the Afterburner???:

With arrow on top???

Hcash · 02-28-2008, 12:49 PM

Hello???

	sevenstring guitars		sevenstring registry		photo gallery		merch

02-23-2008, 05:12 PM	#1 (permalink)
Hcash These Eyes Are Blind Join Date: Aug 2007 Location: Winston Salem, NC Posts: 408 Real Name: Holden Main Seven: n/a Main ERG: Ibanez MMM1 Rig: 2112 > Engl 920/50 Thanked: 7	Wiring help!!! I E-mailed EMG but they sent me the wrong diagram and after I E-mailed them back they haven't responded... So I need a wiring diagram for one pickup, an EMG afterburner, and a killswitch.

02-23-2008, 08:56 PM	#2 (permalink)
ibznorange Chief Officer/RHLC © Join Date: Aug 2007 Location: AZ Posts: 7,422 Real Name: Max Main Seven: Ir now Sevenless :squint: Main ERG: A Dead Cat Rig: Mesa Rectoverb Combo Thanked: 46	one PASSIVE pickup btw Reverse Headstocks or Bust Dude...i just got a spam email that was titled "Funky date rape trick" -Zepp88 I just got another funny email "Her pussy smiled at me" -Zepp88 Don't tell me you haven't heard of Raptor Jesus It's important that you know this information :headnod: It will decide your fate when we are pwned. -JoeOvChaos I was going KAT KAT KAT KAT and you were going KAT... chk... KAT... chk-die. -TomAwesome

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I can has new wiring?	OzzyC	Pickups, Electronics & General Tech	24	01-14-2008 10:12 PM
Wiring	rgh96gt	Pickups, Electronics & General Tech	2	01-03-2008 05:29 PM
DiMarzio wiring == SD wiring?	g3rmanium	Pickups, Electronics & General Tech	8	03-15-2007 09:40 PM
JPM wiring	jakeskylyr	Pickups, Electronics & General Tech	3	01-02-2007 10:59 PM
Wiring help please? Anyone?	Lozek	Pickups, Electronics & General Tech	2	11-07-2006 05:06 AM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

02-23-2008, 09:09 PM	#3 (permalink)
Hcash These Eyes Are Blind Join Date: Aug 2007 Location: Winston Salem, NC Posts: 408 Real Name: Holden Main Seven: n/a Main ERG: Ibanez MMM1 Rig: 2112 > Engl 920/50 Thanked: 7	Yes, thank you.

02-24-2008, 12:12 AM	#4 (permalink)
Horizon Whore Resident 7 Stringer Join Date: Jun 2007 Location: Warrnambool/Victoria, Australia Posts: 168 Real Name: Dave Main Seven: Schecter Omen 7 Rig: TSL100 > 1960AV Thanked: 3	Electric Guitar Pickups & Accessories - EMG Pickups \| Support thats the only help i can give you mate.. just the wiring diagrams from the site, and something about an afterburner: "Can I use my Afterburner as a volume pot? No. The AB was designed to be an active EQ accessory, not a volume pot. It performs the same function as the EMG-PA2." this is probably no help, but best i could do!

02-26-2008, 05:55 PM	#5 (permalink)
Hcash These Eyes Are Blind Join Date: Aug 2007 Location: Winston Salem, NC Posts: 408 Real Name: Holden Main Seven: n/a Main ERG: Ibanez MMM1 Rig: 2112 > Engl 920/50 Thanked: 7	The guy at EMG e-mailed me back... Quote: "No diagram needed: 1) Connect hot from pup to white wire of AB. 2) Connect ground of pup to black wire of AB. 3) Connect other black wire from AB to middle terminal of EMG jack. 4) Connect green wire of AB to white wire of EMG jack. 5) Connect red wire of AB to red wire of battery clip. 6) Install kill switch on black wire of battery clip. " I will assume the "EMG jack" is the output... And is this the proper way to hook up the Afterburner???: With arrow on top???

02-28-2008, 12:49 PM	#6 (permalink)
Hcash These Eyes Are Blind Join Date: Aug 2007 Location: Winston Salem, NC Posts: 408 Real Name: Holden Main Seven: n/a Main ERG: Ibanez MMM1 Rig: 2112 > Engl 920/50 Thanked: 7	Hello???


	Powered by vBulletin 3.7.2 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. LinkBacks Enabled by vBSEO 3.1.0 "777" Logo © Darren Wilson Content © 2008 Sevenstring.org LLC - Privacy Policy Affiliate Links Directory

» Pickups, Electronics & General Tech

Wiring help!!!