Stripped guitar with no covering

JPMDan · 08-24-2006, 09:16 PM

Come on Adam, not everybody knows the luthier finishes.

keithb · 08-24-2006, 09:17 PM

Quote:

Originally Posted by Elysian

why not just give it a satin finish?

Best of both worlds - you won't have the sticky, glassy-feeling gloss, but the wood will be adequately protected.

Dumple Stilzkin · 08-24-2006, 09:33 PM

I have sanded down 2 guitars in my time, and both have gotten the tung oil treatment. It goes on easy and turns out beautiful. I put 7 coats on my RG, I think I could have put on about 5 or maybe even less, but I wanted it to look
uber shinny! I think it turned out great, course the piece of wood also plays a major role, so if you plan on doing it to yer 1527 it should look similar to mine. I have read you will have to reapply more oil. But it takes quite a while for the oil to wear out, my other axe is still going 3 years strong from only 3 coats. On with the pictures!

Between coats I used the finest (00000?) steel wool I could find, and also when I was finished. It actually has changed the tone slightly, it is even more punchy, really sounds good with chords. And the low b tone is awesome.

Elysian · 08-24-2006, 09:37 PM

man not to rain on your parade, but theres really nothing beautiful about basswood

nyck · 08-24-2006, 09:42 PM

Will tung oil protect from warping and other bad stuff?

darren · 08-25-2006, 07:15 AM

"Satin" isn't a "luthier" finish... it's just a non-glossy clearcoat that can be polyester, polyurethane, lacquer, etc. Anyone who's painted anything knows that paint comes in different degrees of lustre ranging from "gloss" to "flat" with 3 to 5 variants in between.

Tung oil will protect from average environmental exposure as long as it's well maintained. But it doesn't protect from impact as well as a hard clearcoat.

Stitch · 08-25-2006, 07:09 PM

on the upside, tung oil smells real nice...

	sevenstring guitars		sevenstring registry		photo gallery		merch

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
All Shall Perish covering Judas Priest	telecaster90	General Music Discussion	5	04-23-2007 11:53 AM
Ben Folds covering "Bitches Ain't Shit" (if you think this is work safe, you're dumb)	Drew	General Music Discussion	6	02-21-2007 10:33 PM
Song covering	peterchau	General Music Discussion	4	11-09-2006 11:19 PM
A7X covering Walk by Pantera	telecaster90	General Music Discussion	40	07-19-2006 12:51 AM
KSE covering Holy Diver!	telecaster90	General Music Discussion	25	06-17-2006 01:49 PM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

08-24-2006, 09:16 PM	#11 (permalink)
JPMDan Dis fuckin' guy... Join Date: Jun 2006 Location: New Orleans, Louisiana Posts: 5,541 Real Name: Dan Main Seven: Conklin GTG-7T Rig: A. Reactor 112+PodXT Thanked: 42	Come on Adam, not everybody knows the luthier finishes.

08-24-2006, 09:33 PM	#13 (permalink)
Dumple Stilzkin Special needs member Join Date: Jul 2005 Location: Spokane, WA Posts: 139 Real Name: Jon Main Seven: Ibanez RG7620VK Rig: IBZ-RG7620 > 5150II Thanked: 0	I have sanded down 2 guitars in my time, and both have gotten the tung oil treatment. It goes on easy and turns out beautiful. I put 7 coats on my RG, I think I could have put on about 5 or maybe even less, but I wanted it to look uber shinny! I think it turned out great, course the piece of wood also plays a major role, so if you plan on doing it to yer 1527 it should look similar to mine. I have read you will have to reapply more oil. But it takes quite a while for the oil to wear out, my other axe is still going 3 years strong from only 3 coats. On with the pictures! Between coats I used the finest (00000?) steel wool I could find, and also when I was finished. It actually has changed the tone slightly, it is even more punchy, really sounds good with chords. And the low b tone is awesome.

08-24-2006, 09:37 PM	#14 (permalink)
Elysian ss.org Regular Join Date: Dec 2004 Location: Plano, TX Posts: 3,795 Real Name: Adam Main Seven: Elysian Custom Guitars Thanked: 17 $Elysian is rather kvlt and tr00. \m/$ $Elysian is rather kvlt and tr00. \m/$ $Elysian is rather kvlt and tr00. \m/$ $Elysian is rather kvlt and tr00. \m/$ $Elysian is rather kvlt and tr00. \m/$ $Elysian is rather kvlt and tr00. \m/$ $Elysian is rather kvlt and tr00. \m/$	man not to rain on your parade, but theres really nothing beautiful about basswood

08-24-2006, 09:42 PM	#15 (permalink)
nyck blah! Join Date: May 2005 Location: Tallahassee, FL Posts: 3,039 Real Name: Nick Main Seven: no 7 Rig: Mesa .50 Caliber Thanked: 2	Will tung oil protect from warping and other bad stuff?

08-25-2006, 07:15 AM	#16 (permalink)
darren Mr. Negative Pants™ Join Date: Oct 2004 Location: Greater Toronto Area, Canada Posts: 7,362 Main Seven: OMFG! EBMM JP7 Rig: GT6PowerBlockThiele Thanked: 32	"Satin" isn't a "luthier" finish... it's just a non-glossy clearcoat that can be polyester, polyurethane, lacquer, etc. Anyone who's painted anything knows that paint comes in different degrees of lustre ranging from "gloss" to "flat" with 3 to 5 variants in between. Tung oil will protect from average environmental exposure as long as it's well maintained. But it doesn't protect from impact as well as a hard clearcoat.

08-25-2006, 07:09 PM	#17 (permalink)
Stitch Join Date: Aug 2005 Location: Edinburgh, Scotland Posts: 6,890 Real Name: Simon Main Seven: Ibanez RG7420 & S7420FMTW Main ERG: Orion OG8 Rig: Peavey 6505 Thanked: 109	on the upside, tung oil smells real nice...


	Powered by vBulletin 3.7.2 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. LinkBacks Enabled by vBSEO 3.1.0 "777" Logo © Darren Wilson Content © 2008 Sevenstring.org LLC - Privacy Policy Affiliate Links Directory

» Pickups, Electronics & General Tech

Stripped guitar with no covering