Trem replacement question

777 · 05-31-2006, 05:26 PM

so im swapping a lo-pro trs trem for a lo-pro-edge on an Rg450 im working on and was wodnering when replacing the studs do i take jus the part that touched the trem out or all of the stud includint what it screws into out and put in the new stud pieces??

Elysian · 05-31-2006, 06:50 PM

the edge studs should be a bit larger than the TRS studs, you'd have to take them out, dowel them, and redrill them to get an accurate placement for the new studs...

777 · 05-31-2006, 07:03 PM

how much larger are they, im getting the guotar for mods on saturday, is it alot?

cant i just drill the stud holes a small bit wider and put them in

A LITTLE HELP HERE!!

05-31-2006, 05:26 PM	#1
777 SS.Org's Irish Guy Join Date: Jan 2006 Location: Dublin.Ireland Posts: 1,126 Main Seven: Its a Suprise :3 Rig: Valveking 100w 212 Thanked: 9	Trem replacement question so im swapping a lo-pro trs trem for a lo-pro-edge on an Rg450 im working on and was wodnering when replacing the studs do i take jus the part that touched the trem out or all of the stud includint what it screws into out and put in the new stud pieces?? Shredding Isn't Music..........Its Awesome!!!

05-31-2006, 06:50 PM	#2
Elysian CrabClaw Enthusiast Join Date: Dec 2004 Location: Plano, TX Posts: 4,560 Real Name: Adam Main Seven: Elysian Custom Guitars Thanked: 26 $Elysian is rather kvlt and tr00. \m/$ $Elysian is rather kvlt and tr00. \m/$ $Elysian is rather kvlt and tr00. \m/$ $Elysian is rather kvlt and tr00. \m/$ $Elysian is rather kvlt and tr00. \m/$ $Elysian is rather kvlt and tr00. \m/$ $Elysian is rather kvlt and tr00. \m/$	the edge studs should be a bit larger than the TRS studs, you'd have to take them out, dowel them, and redrill them to get an accurate placement for the new studs... Sign your negative rep.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LoTrs7 - Trem (and/or) Arm replacement (Lefty plea for help)	astrocreep	Pickups, Electronics & General Tech	4	02-09-2007 02:08 PM
Newbie pickguard replacement question	Chris	Standard Guitars	11	07-09-2006 07:17 AM
Lo-Pro Trem Setup question (yes, again)	mazafaka	Sevenstring Guitars	22	10-22-2005 12:10 PM
Buddy needs a replacement trem bar	Chris	Gear & Equipment	19	03-12-2005 03:46 PM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

05-31-2006, 07:03 PM	#3
777 SS.Org's Irish Guy Join Date: Jan 2006 Location: Dublin.Ireland Posts: 1,126 Main Seven: Its a Suprise :3 Rig: Valveking 100w 212 Thanked: 9	how much larger are they, im getting the guotar for mods on saturday, is it alot? cant i just drill the stud holes a small bit wider and put them in A LITTLE HELP HERE!!


	Powered by vBulletin 3.7.3 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. Search Engine Optimization by vBSEO 3.2.0 "777" Logo © Darren Wilson Privacy Policy Affiliate Links Directory

» Pickups, Electronics & General Tech

Trem replacement question