homepage   sevenstring guitars   sevenstring registry   photo gallery   subscription   spy 
Sevenstring.org - The Seven String Guitar Authority
Go Back   SevenString.org
LIKE SS.org on Facebook FOLLOW SS.org on Twitter

Shask Shask is offline

SS.org Regular

Visitor Messages

Showing Visitor Messages 1 to 4 of 4
  1. steinmetzify
  2. man jerk
    06-07-2013 06:22 PM - permalink
    man jerk
    Thanks for the Whammy, received it today and I'm very happy!
  3. chichi989
    05-23-2013 04:55 PM - permalink
    hey dude was just revisiting my post about the GM2 and midi mate:


    was curious if you could help me a bit more. i just want to make sure i understand what you were explaining; that i would only be able to set a preset (an effect, factory or user) to buttons 0-4 and then 5-9 i can set paramaters per preset like bypass and tap tempo etc.

    i've done this now for preset 0 and successfully set tap tempo and bypass to that preset. but when i try to use the learn feature to set another preset (let's say a clean channel) to another channel like channel 1, it overwrites everything i set on channel 0.

    is there a setting maybe that i need to change to allow what i'm trying to do to happen? or am i misunderstanding how to use these two together maybe?

    any help would be great man this stuff if really confusing me.

  4. Deadnightshade
    12-27-2011 05:57 PM - permalink
    I'm sending you here so as not to derail the SEE announcement thread.

    Since you asked about using it to its full potential,I can tell how I personally use it:

    I'm a bit of a weird ass on my distorted presets ,as I cut almost completely the bass from the amp and really low values around 10% on the parametric EQ,and I focus my high end with an open weeper wah (the only one that does the job for me) at exactly 80%.Add to that I'm limited cause I own the HD300,and you got the reason why I grew so fond of these controls

    I generally keep the master control cranked,the sag at values above half for tight amps and below half for loose amps ,the bias almost always at high values,and the bias-x around 28% (or generally below half) if the amp model needs some fine-tuning ease on the high end (supposing I've already EQ'd the high end the best i could) ,or above half if i need it tighter on the high end.On cleans I do the same,except for I usually keep the sag low.

About Me

  • About Shask
    Primary Seven
    Schecter Hellraiser C7
  • Gear Details
    Sevenstring Guitars
    Schecter Hellraiser C7, Ibanez RG7321
    Other Guitars
    Schecter Banshee, Charvel So-Cal, Gibson Gothic V, Ibanez RG5EX1
    Mesa Triple Recto, Axe-FX II, SLA-2
    Effects & Pedals
    Maxon OD808, MXR Classic OD, Small Clone
    Cabinets / Monitors
    GFlex, Avatar 212
    Studio & Recording Gear
    Presonus 22VSL, Reaper, Komplete
    Misc/Other Gear


Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 07:39 AM
  • Join Date: 11-27-2011
  • Referrals: 0


Showing Friends 1 to 3 of 3

Gear Details

    Gear Details
    Sevenstring Guitars: Schecter Hellraiser C7, Ibanez RG7321

    Other Guitars: Schecter Banshee, Charvel So-Cal, Gibson Gothic V, Ibanez RG5EX1

    Amps/Preamps: Mesa Triple Recto, Axe-FX II, SLA-2

    Effects/Pedals: Maxon OD808, MXR Classic OD, Small Clone

    Cabs/Monitors: GFlex, Avatar 212

    Studio Gear: Presonus 22VSL, Reaper, Komplete

    Misc/Other: MicroKORG

Feedback Score

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
Members who left positive:
Members who left negative:
Total positive feedback: 5
View Complete Feedbacks for Shask
6 Months
12 Months
 Positive 0 0 0
 Neutral 0 0 0
 Negative 0 0 0

All times are GMT -5. The time now is 11:12 AM.

Our Network: PRS Guitar Forum | Luthier Forum | SG Guitar Forum | Les Paul Forum | Marshall Amp Forum | Acoustic Guitar Forum

SS.org proudly supports St. Jude Children's Research Hospital

Copyright © 2004-2016, SevenString.org. All Rights Reserved.