FS: Schecter C7 w/ EMG 707s

musicboyy · 05-14-2007, 06:37 PM

I recently got this, but decided to now sell it as I already have an EMG equipped Hellraiser and that's enough...

This is a see-thru maroon '99 Schecter C7 with black hardware (I don't seem to see black hardware on these very often). It has an ash body with cream binding and a bolt-on maple neck with rosewood fretboard. This one had professionally installed EMG 707s (I didn't have it done). The routing is very clean, but you can tell that it wasn't manufactured that way. They're definitely better than some of the after market routing I've seen. It has the standard volume/tone/3-way switch set up.

It plays and sounds great. The only blemish on it is a thin, inch long paint scratch on the top of the upper horn. I tried to take a pic of it below. Other than that and typical clearcoat swirling, it is in excellent condition!

I am asking for $350 shipped in the USA, but am open to offers. It didn't come with a case when I got it, but it was packed very well and I will just use the same packaging.

This pic looks like there are 2 scratches, but the top one is just a reflection, the bottom one is the scratch.

musicboyy · 05-18-2007, 08:20 AM

Benzesp · 05-18-2007, 02:45 PM

dude if it had a TOM bridge I'd hit it.....

musicboyy · 05-18-2007, 02:55 PM

Quote:

Originally Posted by Benzesp

dude if it had a TOM bridge I'd hit it.....

I don't find anything wrong with the standard fixed bridge...functions perfectly and is very comfy. Basically feels the same as the bridge on your Carvin. Is the TOM just a personal preference of yours?

Benzesp · 05-18-2007, 06:28 PM

Yea, It's a preference. There is something weird about a carved top guitar without a a TOM.. It just feels weird to me. Yea I know the carvin has the traditional hard tail but I've grown to just live with it. By the way I got it today.. Thanks... I told a friend about this Schecter, he's in the market, maybe he'll take it off your hands otherwise I'm still debating it.

Chris · 05-18-2007, 07:25 PM

Quote:

Originally Posted by musicboyy

I don't find anything wrong with the standard fixed bridge...functions perfectly and is very comfy. Basically feels the same as the bridge on your Carvin. Is the TOM just a personal preference of yours?

I have a C7 with that same bridge, and I dig it.

.2c.

musicboyy · 05-18-2007, 11:11 PM

Quote:

Originally Posted by Benzesp

Yea, It's a preference. There is something weird about a carved top guitar without a a TOM.. It just feels weird to me. Yea I know the carvin has the traditional hard tail but I've grown to just live with it. By the way I got it today.. Thanks... I told a friend about this Schecter, he's in the market, maybe he'll take it off your hands otherwise I'm still debating it.

Great! I'm glad the Carvin arrived safely!!

Cool, let me know what you or your friend decide...

musicboyy · 05-21-2007, 11:25 PM

<sigh> I was just playing it and I don't know if I can part with this guitar...there is just something about it. I'm going to hold off on selling this for now...

NEVERMIND

musicboyy · 05-24-2007, 08:18 AM

Ignore the previous post...I'm going to keep this up for sale and see what happens.

musicboyy · 05-31-2007, 11:21 PM

Price drop...

05-14-2007, 06:37 PM	#1
musicboyy ss.org Regular Join Date: Jun 2006 Location: Chelmsford, MA Posts: 296 iTrader: (7) Real Name: Dan Main Seven: Ibanez UV7BK '97 Rig: NI Guitar Rig Thanked: 3	FS: Schecter C7 w/ EMG 707s I recently got this, but decided to now sell it as I already have an EMG equipped Hellraiser and that's enough... This is a see-thru maroon '99 Schecter C7 with black hardware (I don't seem to see black hardware on these very often). It has an ash body with cream binding and a bolt-on maple neck with rosewood fretboard. This one had professionally installed EMG 707s (I didn't have it done). The routing is very clean, but you can tell that it wasn't manufactured that way. They're definitely better than some of the after market routing I've seen. It has the standard volume/tone/3-way switch set up. It plays and sounds great. The only blemish on it is a thin, inch long paint scratch on the top of the upper horn. I tried to take a pic of it below. Other than that and typical clearcoat swirling, it is in excellent condition! I am asking for $350 shipped in the USA, but am open to offers. It didn't come with a case when I got it, but it was packed very well and I will just use the same packaging. This pic looks like there are 2 scratches, but the top one is just a reflection, the bottom one is the scratch.

05-18-2007, 08:20 AM	#2
musicboyy ss.org Regular Join Date: Jun 2006 Location: Chelmsford, MA Posts: 296 iTrader: (7) Real Name: Dan Main Seven: Ibanez UV7BK '97 Rig: NI Guitar Rig Thanked: 3	Bump

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What 3 way switch do i need for an rg1527 w/EMG 707s?	777	Pickups, Electronics & General Tech	14	05-15-2007 11:41 PM
Finally got my emg 707s in Pix(56k=shit-bitches)	777	Sevenstring Guitars	32	10-11-2006 02:35 AM
THREE EMG 707S!!! and a lo-pro7!!!!!!!	777	Sevenstring Guitars	34	07-16-2006 01:38 AM
Anyone got Pics OF An Rg1527Rb W/Emg 707s?	777	Sevenstring Guitars	37	06-30-2006 08:40 PM
EMG 707s or Evo7+air norton7	777	Pickups, Electronics & General Tech	19	04-30-2006 10:34 AM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

05-18-2007, 02:45 PM	#3
Benzesp IdrinkYourMilkshake! Join Date: Dec 2006 Location: Austin,TX Posts: 943 iTrader: (5) Real Name: Benny Main Seven: Darkside Tele7 Rig: Splawn>2 Mesa 4x12's Thanked: 16	dude if it had a TOM bridge I'd hit it.....

05-18-2007, 06:28 PM	#5
Benzesp IdrinkYourMilkshake! Join Date: Dec 2006 Location: Austin,TX Posts: 943 iTrader: (5) Real Name: Benny Main Seven: Darkside Tele7 Rig: Splawn>2 Mesa 4x12's Thanked: 16	Yea, It's a preference. There is something weird about a carved top guitar without a a TOM.. It just feels weird to me. Yea I know the carvin has the traditional hard tail but I've grown to just live with it. By the way I got it today.. Thanks... I told a friend about this Schecter, he's in the market, maybe he'll take it off your hands otherwise I'm still debating it.

05-21-2007, 11:25 PM	#8
musicboyy ss.org Regular Join Date: Jun 2006 Location: Chelmsford, MA Posts: 296 iTrader: (7) Real Name: Dan Main Seven: Ibanez UV7BK '97 Rig: NI Guitar Rig Thanked: 3	<sigh> I was just playing it and I don't know if I can part with this guitar...there is just something about it. I'm going to hold off on selling this for now... NEVERMIND

05-24-2007, 08:18 AM	#9
musicboyy ss.org Regular Join Date: Jun 2006 Location: Chelmsford, MA Posts: 296 iTrader: (7) Real Name: Dan Main Seven: Ibanez UV7BK '97 Rig: NI Guitar Rig Thanked: 3	Ignore the previous post...I'm going to keep this up for sale and see what happens.

05-31-2007, 11:21 PM	#10
musicboyy ss.org Regular Join Date: Jun 2006 Location: Chelmsford, MA Posts: 296 iTrader: (7) Real Name: Dan Main Seven: Ibanez UV7BK '97 Rig: NI Guitar Rig Thanked: 3	Price drop...


	Powered by vBulletin 3.7.3 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. Search Engine Optimization by vBSEO 3.2.0 "777" Logo © Darren Wilson Privacy Policy Affiliate Links Directory

» Guitars For Sale / Trade / Wanted

FS: Schecter C7 w/ EMG 707s