WTB: Ibanez Munky Bar (U Bar)

DangerousTacos · 01-04-2007, 08:46 PM

Anyone have one of those U-Bar thingies for the K-7 laying around? Or perhaps a source for them?

drshock · 01-09-2007, 03:19 PM

Try looking on Ibanez.com in the parts catalog. Find the whammy bars in the parts lists and get the product number then take the number to guitar center or and Ibanez dealer and ask them to order it. If you cant find the U-bar then try e-mailing Ibanez for the product number.

Scott · 01-09-2007, 03:35 PM

I don't think they can be ordered new. I think your only shot is to get one from someone with a k-7.

drshock · 01-10-2007, 03:08 PM

Quote:

Originally Posted by Scott

I don't think they can be ordered new. I think your only shot is to get one from someone with a k-7.

I dont know, you should be able to at least e-mail Ibanez about it and see if they can send you the product number, but I've heard a few bad things about thier customer service so I dont really know, but in any case they really should let you order them new, there isnt any reason for them not to.

JPMDan · 01-10-2007, 03:38 PM

What about Ibanez Rules? Maybe Rich can help you out?

DangerousTacos · 01-10-2007, 03:47 PM

Reason I'd asked was because I have a RG7620 that is undergoing some... mods. I was going to do the whole "lefty" floyd trem mod, and slap a ubar on it, but with the tutorials I've read on the trem mod, it seems hard to do. Any suggestions?

Scott · 01-10-2007, 05:37 PM

It's not hard. I did it on one of my trems.

The thing you need to remember if you want to use a U-bar, is that you'll need two arm holders if you want it to be stable. When doing this however, there wont be room in the cavity for the second arm holder, you'll have to route some wood.

drshock · 01-11-2007, 04:15 PM

Quote:

Originally Posted by Scott

It's not hard. I did it on one of my trems.

The thing you need to remember if you want to use a U-bar, is that you'll need two arm holders if you want it to be stable. When doing this however, there wont be room in the cavity for the second arm holder, you'll have to route some wood.

At least its only a little bit of wood, I'd say it wouldnt be a bad idea because there isnt much at risk if you screw up.

	sevenstring guitars		sevenstring registry		photo gallery		merch

01-04-2007, 08:46 PM	#1 (permalink)
DangerousTacos dt.com Irregular :P Join Date: Apr 2006 Location: North Carolina Posts: 163 iTrader: (0) Real Name: Sean Main Seven: Ibanez S7420 FMTT ; Ibanez RG2077XL RB Rig: Fender FM 212R 100W Thanked: 0	WTB: Ibanez Munky Bar (U Bar) Anyone have one of those U-Bar thingies for the K-7 laying around? Or perhaps a source for them? Signature Removed - Image exceeds 300 px by 100 px

01-09-2007, 03:19 PM	#2 (permalink)
drshock Street-good guy Join Date: Apr 2006 Location: rochester ny Posts: 512 iTrader: (1) Real Name: aaron Main Seven: modded 7620 and C-7 BJ Rig: Randall Half Stack Thanked: 2	Try looking on Ibanez.com in the parts catalog. Find the whammy bars in the parts lists and get the product number then take the number to guitar center or and Ibanez dealer and ask them to order it. If you cant find the U-bar then try e-mailing Ibanez for the product number. Do you know my name? Do you know my NUMBER?

01-09-2007, 03:35 PM	#3 (permalink)
Scott Aye. Join Date: Aug 2005 Location: USS Enterprise Posts: 5,447 iTrader: (5) Real Name: James Doohan Rig: Transporter Thanked: 40	I don't think they can be ordered new. I think your only shot is to get one from someone with a k-7. POOF!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

01-10-2007, 03:38 PM	#5 (permalink)
JPMDan Dis fuckin' guy... Join Date: Jun 2006 Location: New Orleans, Louisiana Posts: 5,541 iTrader: (7) Real Name: Dan Main Seven: Conklin GTG-7T Rig: A. Reactor 112+PodXT Thanked: 42	What about Ibanez Rules? Maybe Rich can help you out?

01-10-2007, 03:47 PM	#6 (permalink)
DangerousTacos dt.com Irregular :P Join Date: Apr 2006 Location: North Carolina Posts: 163 iTrader: (0) Real Name: Sean Main Seven: Ibanez S7420 FMTT ; Ibanez RG2077XL RB Rig: Fender FM 212R 100W Thanked: 0	Reason I'd asked was because I have a RG7620 that is undergoing some... mods. I was going to do the whole "lefty" floyd trem mod, and slap a ubar on it, but with the tutorials I've read on the trem mod, it seems hard to do. Any suggestions?

01-10-2007, 05:37 PM	#7 (permalink)
Scott Aye. Join Date: Aug 2005 Location: USS Enterprise Posts: 5,447 iTrader: (5) Real Name: James Doohan Rig: Transporter Thanked: 40	It's not hard. I did it on one of my trems. The thing you need to remember if you want to use a U-bar, is that you'll need two arm holders if you want it to be stable. When doing this however, there wont be room in the cavity for the second arm holder, you'll have to route some wood.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Ibanez LACS RG7 Munky Proto model	nikt	Guitars For Sale / Trade / Wanted	38	05-30-2007 12:11 PM
Munky+Head's LACS Ibanez 7's PICS	jtm45	Sevenstring Guitars	127	05-13-2007 10:38 AM
Another Hot Munky Guitar	Memq	Sevenstring Guitars	67	03-02-2007 10:21 PM
Munky and Beer	Kotex	General Music Discussion	52	11-02-2006 03:13 AM
Munky and 8 String Ibanez with EMGs	Memq	Extended Range Guitars	73	09-27-2006 11:15 PM


	Powered by vBulletin 3.7.2 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. LinkBacks Enabled by vBSEO 3.1.0 "777" Logo © Darren Wilson Content © 2008 Sevenstring.org LLC - Privacy Policy Affiliate Links Directory

» Gear For Sale / Trade/ Wanted

WTB: Ibanez Munky Bar (U Bar)