Djent tones on GNX3?

HamBungler · 02-26-2008, 08:30 PM

Hey there! I was just wondering if any of you fellows/fellettes had any patches with your Djent tones. If not, any suggestions on settings for the beast? I run a Fender 85 combo (solid state,very transparent) and Crate GX1200H (similar to 85, but a head) ampwise and will probably use my Mahogany A-7 with the X2N in the bridge position. I know, Djent also requires proper muting technique, which I got down pretty solid, I just wanna know what sorta stuff to dial in to enhance it! Thanks again!

djpharoah · 02-27-2008, 01:24 PM

You need to get some of Boobers tones from the patch library - he uploaded some really nice ones.

The Dark Wolf · 02-27-2008, 01:34 PM

Yup, yup. I have a pretty clear, articulate type tone going on.

HamBungler · 02-27-2008, 01:35 PM

Quote:

Originally Posted by djpharoah

You need to get some of Boobers tones from the patch library - he uploaded some really nice ones.

I shall check em out! I still need to get a cable to go from the midi out to the Gamepad port on my PC, which should only be $5 at the most.

The Dark Wolf · 02-27-2008, 01:40 PM

Wait... GNX3? Oops!

Me and Mesh probably were talking about GNX3000. But, I think I do have a bunch of GNX3 presets, too, from back when I used the GNX3.

I also have many good Genesis 3/GNX1 presets, and there might be a converter out there to convert between the original GNX tones. I think.

djpharoah · 02-27-2008, 03:55 PM

Whoops - I mistook your GNX3 for a GNX3k/3000 - sorry.

HamBungler · 02-27-2008, 05:25 PM

Its fine guys!

I'm pretty sure there's a converter out there for em', I just have to find it! Haha. In the meanwhile, I've found that using the coil tap with my X2N with high gain produces some pretty good djent with my main patch, I shall experiment further and see what happens!

02-26-2008, 08:30 PM	#1
HamBungler Lord Zorgatron Join Date: May 2007 Location: Woodville, OH Posts: 1,098 Real Name: Nate Main Seven: Schecter A-7 w/X2N7 Rig: Peavey -> GNX 3 Thanked: 13	Djent tones on GNX3? Hey there! I was just wondering if any of you fellows/fellettes had any patches with your Djent tones. If not, any suggestions on settings for the beast? I run a Fender 85 combo (solid state,very transparent) and Crate GX1200H (similar to 85, but a head) ampwise and will probably use my Mahogany A-7 with the X2N in the bridge position. I know, Djent also requires proper muting technique, which I got down pretty solid, I just wanna know what sorta stuff to dial in to enhance it! Thanks again! I'm assuming he's going to want to mass produce these rack pies, and why not? I love racks, I love pies, so put them together and you have pie covered titties. - JJ Don't thank me, thank the wombat rapist. - Jamie And Now, a song about Zombies.-some metalcore vocalist Mah Deviantart Myspace The Many Faces of Egoraptor

02-27-2008, 01:34 PM	#3
The Dark Wolf *Canis lupis obscurus* • Super Moderator • Join Date: Apr 2005 Location: Toledo, Ohio. USA Posts: 15,020 Real Name: Roberto Main Seven: 2001 Ibanez RG2027XVV Rig: GNX/Magicstomp Thanked: 90	Yup, yup. I have a pretty clear, articulate type tone going on. http://www.wolf.org

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MFXsupermodels cd's for GNX2 and GNX3	pfindeis	Gear For Sale / Trade/ Wanted	3	02-28-2008 11:55 AM
Wanted- mfxsupermodels cd for GNX3	pfindeis	Gear For Sale / Trade/ Wanted	0	01-05-2008 09:12 PM
I'm looking into getting a Digitech GNX3	HamBungler	Gear & Equipment	10	10-20-2007 11:59 PM
New Song!!! (Djent-djent! Shred! Please Listen!)	Nik	Recording Studio	9	01-16-2007 03:32 AM
FS: Digitech GNX3 & Ibanez RG570	Robotechnology	Guitars For Sale / Trade / Wanted	0	09-12-2005 01:57 PM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

02-27-2008, 01:24 PM	#2
djpharoah Senior Member Join Date: Sep 2006 Location: Orange County, CA Posts: 4,816 Real Name: Mesh Thanked: 195	You need to get some of Boobers tones from the patch library - he uploaded some really nice ones.

02-27-2008, 01:40 PM	#5
The Dark Wolf *Canis lupis obscurus* • Super Moderator • Join Date: Apr 2005 Location: Toledo, Ohio. USA Posts: 15,020 Real Name: Roberto Main Seven: 2001 Ibanez RG2027XVV Rig: GNX/Magicstomp Thanked: 90	Wait... GNX3? Oops! Me and Mesh probably were talking about GNX3000. But, I think I do have a bunch of GNX3 presets, too, from back when I used the GNX3. I also have many good Genesis 3/GNX1 presets, and there might be a converter out there to convert between the original GNX tones. I think.

02-27-2008, 03:55 PM	#6
djpharoah Senior Member Join Date: Sep 2006 Location: Orange County, CA Posts: 4,816 Real Name: Mesh Thanked: 195	Whoops - I mistook your GNX3 for a GNX3k/3000 - sorry.

02-27-2008, 05:25 PM	#7
HamBungler Lord Zorgatron Join Date: May 2007 Location: Woodville, OH Posts: 1,098 Real Name: Nate Main Seven: Schecter A-7 w/X2N7 Rig: Peavey -> GNX 3 Thanked: 13	Its fine guys! I'm pretty sure there's a converter out there for em', I just have to find it! Haha. In the meanwhile, I've found that using the coil tap with my X2N with high gain produces some pretty good djent with my main patch, I shall experiment further and see what happens!


	Powered by vBulletin 3.7.3 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. Search Engine Optimization by vBSEO 3.2.0 "777" Logo © Darren Wilson Privacy Policy Affiliate Links Directory

» Gear & Equipment

Djent tones on GNX3?