Opinions needed on a Rig: Ada Mp1 3.666 + Carvin FET 450

silentrage · 05-27-2009, 11:04 PM

Heya fellas, I'm looking to acquire a new rig through a trade.
It's my dc-5 combo for a H&K Attax 100 preamp, a Ada mp1 3.666 mod and a Carvin FET 450.

I know the ada mp1 is supposed to be awesome, but I'd like to know if anyone runs these into a solid state poweramp with success.
Also I can't find much info about the Attax 100 and the Carvin FET 450 at all, anyone like to chime in on those?

Cheers!

MTech · 05-27-2009, 11:38 PM

Not sure on the other two but for best tone you'd want a tube poweramp regardless. Somebody just posted on here recently about their ADA seeming thin and it was obvious it was because of using a SS poweramp. Get yourself a Mesa 20:20 at least and that'll get you some tube warmth working for you.

Honestly though that sounds like a rip because you can buy a used ADA for like $75-$150 if you look around and a DC5 isn't cheap.

silentrage · 05-27-2009, 11:45 PM

Well I don't have the option to a tube poweramp because I have absolutely no cash.

I think i'm gonna try out his rig to see if it sounds good.
Where do you find an ada mp1 for that cheap? The ones I've seen lately are 200 and they're stock.

Any idea if anyone famous use the FET450?

MTech · 05-28-2009, 12:55 AM

I bought mine at Guitar Center used for $79... people are always selling them in craigslist and bringing them into stores etc... I really think you'd be shafting yourself doing that trade. Sell your amp and use the money to get better gear if you don't want your amp anymore.

05-27-2009, 11:04 PM	#1
silentrage The DeRailer Join Date: Nov 2008 Location: Toronto, ON Posts: 2,105 Real Name: ze Main Seven: RG2027xvv Rig: Mark III, Rockmaster Thanked: 26	Opinions needed on a Rig: Ada Mp1 3.666 + Carvin FET 450 Heya fellas, I'm looking to acquire a new rig through a trade. It's my dc-5 combo for a H&K Attax 100 preamp, a Ada mp1 3.666 mod and a Carvin FET 450. I know the ada mp1 is supposed to be awesome, but I'd like to know if anyone runs these into a solid state poweramp with success. Also I can't find much info about the Attax 100 and the Carvin FET 450 at all, anyone like to chime in on those? Cheers!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Opinions needed for new, heavier song...	Underture	Recording Studio	4	07-29-2008 09:37 AM
New projects and opinions needed	hirah	Standard Guitars	2	07-01-2008 08:04 AM
7 String Opinions Needed, All are welcome!	progmetaldan	Sevenstring Guitars	22	11-03-2007 01:29 AM
J-Custom JCRG-1S NT - Opinions needed	belial	Standard Guitars	25	10-28-2007 06:15 PM
7321 Opinions Needed	Plaschkes	Sevenstring Guitars	34	11-26-2006 11:55 AM

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

05-27-2009, 11:38 PM	#2
MTech ss.org Regular Join Date: Apr 2009 Location: East Coast Posts: 1,663 Main ERG: Rico Jr Jekyll 8 Thanked: 9	Not sure on the other two but for best tone you'd want a tube poweramp regardless. Somebody just posted on here recently about their ADA seeming thin and it was obvious it was because of using a SS poweramp. Get yourself a Mesa 20:20 at least and that'll get you some tube warmth working for you. Honestly though that sounds like a rip because you can buy a used ADA for like $75-$150 if you look around and a DC5 isn't cheap.

05-27-2009, 11:45 PM	#3
silentrage The DeRailer Join Date: Nov 2008 Location: Toronto, ON Posts: 2,105 Real Name: ze Main Seven: RG2027xvv Rig: Mark III, Rockmaster Thanked: 26	Well I don't have the option to a tube poweramp because I have absolutely no cash. I think i'm gonna try out his rig to see if it sounds good. Where do you find an ada mp1 for that cheap? The ones I've seen lately are 200 and they're stock. Any idea if anyone famous use the FET450?

05-28-2009, 12:55 AM	#4
MTech ss.org Regular Join Date: Apr 2009 Location: East Coast Posts: 1,663 Main ERG: Rico Jr Jekyll 8 Thanked: 9	I bought mine at Guitar Center used for $79... people are always selling them in craigslist and bringing them into stores etc... I really think you'd be shafting yourself doing that trade. Sell your amp and use the money to get better gear if you don't want your amp anymore.


	Powered by vBulletin 3.7.3 Copyright ©2000 - 2010, Jelsoft Enterprises Ltd. Search Engine Optimization by vBSEO 3.3.2 "777" Logo © Darren Wilson Privacy Policy Affiliate Links Directory

» Gear & Equipment

Opinions needed on a Rig: Ada Mp1 3.666 + Carvin FET 450