Need help identifying speakers

noodles · 12-30-2007, 10:12 PM

This is from a JCM800 cab Siggy picked up. They're obviously not stock, but we have no clue what they are. Here are some close-ups of the only labels on them. The other two speakers are illegible.

Any clue?

hirah · 12-31-2007, 12:23 AM

eminence 12" speakers.made in september 1988.

this is what i gathered from the manufacturers codes.
Speaker Codes, Amps, & More

Toshiro · 12-31-2007, 03:42 AM

You can email Emi that number and they'll tell you what they are.

ChrisPcritter · 12-31-2007, 04:38 AM

At first glance they looked like emi's to me but I couldn't find anything to back it up... Good job Hirah

siggy14 · 12-31-2007, 10:24 AM

Thanks Guys, I have just emailed them, I also uploaded the pictures into my webshots so they can see for themselves.

Quote:

Originally Posted by Toshiro

You can email Emi that number and they'll tell you what they are.

Quote:

Originally Posted by hirah

eminence 12" speakers.made in september 1988.

this is what i gathered from the manufacturers codes.
Speaker Codes, Amps, & More

Then i went to Eminence website and found this.

Eminence - The Art and Science of Sound

I have emailed eminence to see if they could get me anymore information on these speakers. They are kind of crunchy, almost like a greenback.

siggy14 · 01-02-2008, 11:23 PM

Well I received the following email from eminence.

Hi Todd,

Yes, they are Eminence, custom designed to Marshall's specifications. All I can tell you is that it has a 2.5" voice coil, 8 ohm and a 56oz magnet. I can't identify what soft parts it used because all of them are obsolete and I'm not familiar with them. I can typically find an old build sheet and at least determine what application it was designed for by the soft parts, but, unfortunately, not this one.

Regards,

Anthony Lucas
Sr. Lab Technician
Eminence Speaker LLC
anthony.lucas@eminence.com
502-845-5622 ext. 341

Toshiro · 01-03-2008, 08:54 AM

HighGain510 · 01-03-2008, 09:10 AM

Late to the party here but I was going to say Eminence customs as well since that's what the black-back Emi customs look like that came stock in my 2004 Orange 4x12 too!

HighGain510 · 01-03-2008, 10:36 AM

Btw, here's what mine look like:

Looks very similar except mine has a clear "EM" in the serial so I guess they started doing that in the past few years.

Popsyche · 01-03-2008, 11:41 AM

Quote:

Originally Posted by HighGain510

Late to the party here but I was going to say Eminence customs as well since that's what the black-back Emi customs look like that came stock in my 2004 Orange 4x12 too!

Eminence is one of the largest OEM speaker manufacturers in the world. Not surprising at all to find them in many products.

12-31-2007, 03:42 AM	#3
Toshiro Lazy Basterd Join Date: Nov 2004 Location: Port Orange, FL Posts: 4,608 Main Seven: Schecter C7 Blackjack Rig: Laney GH50L & GT8 Thanked: 11	You can email Emi that number and they'll tell you what they are. Um, Like Sound Files and Stuff ^_^ oh yeah, and some crappy videos too!

01-03-2008, 08:54 AM	#7
Toshiro Lazy Basterd Join Date: Nov 2004 Location: Port Orange, FL Posts: 4,608 Main Seven: Schecter C7 Blackjack Rig: Laney GH50L & GT8 Thanked: 11	Doh.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

12-31-2007, 12:23 AM	#2
hirah Senior Member Join Date: Dec 2005 Location: rhode island Posts: 398 Main Seven: ibanez 7620s Rig: mesa, soldano,peavey Thanked: 12	eminence 12" speakers.made in september 1988. this is what i gathered from the manufacturers codes. Speaker Codes, Amps, & More

12-31-2007, 04:38 AM	#4
ChrisPcritter Senior Member Join Date: Oct 2005 Location: Dixon Ca. Posts: 886 Main Seven: K7 Rig: Rivera khr100 w/sub Thanked: 23	At first glance they looked like emi's to me but I couldn't find anything to back it up... Good job Hirah

01-02-2008, 11:23 PM	#6
siggy14 Banned Join Date: Feb 2007 Location: Alexandria, VA Posts: 72 Thanked: 0	Well I received the following email from eminence. Hi Todd, Yes, they are Eminence, custom designed to Marshall's specifications. All I can tell you is that it has a 2.5" voice coil, 8 ohm and a 56oz magnet. I can't identify what soft parts it used because all of them are obsolete and I'm not familiar with them. I can typically find an old build sheet and at least determine what application it was designed for by the soft parts, but, unfortunately, not this one. Regards, Anthony Lucas Sr. Lab Technician Eminence Speaker LLC anthony.lucas@eminence.com 502-845-5622 ext. 341

01-03-2008, 09:10 AM	#8
HighGain510 Cold As Ice Join Date: Nov 2006 Location: Northern Virginia Posts: 6,930 Real Name: Matt Main Seven: Carvin 727 Thanked: 99	Late to the party here but I was going to say Eminence customs as well since that's what the black-back Emi customs look like that came stock in my 2004 Orange 4x12 too!

01-03-2008, 10:36 AM	#9
HighGain510 Cold As Ice Join Date: Nov 2006 Location: Northern Virginia Posts: 6,930 Real Name: Matt Main Seven: Carvin 727 Thanked: 99	Btw, here's what mine look like: Looks very similar except mine has a clear "EM" in the serial so I guess they started doing that in the past few years.


	Powered by vBulletin 3.7.3 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. Search Engine Optimization by vBSEO 3.2.0 "777" Logo © Darren Wilson Privacy Policy Affiliate Links Directory

» Gear & Equipment

Need help identifying speakers