Possible New Orders of Alnico 5 and/or Alnico 8 magnets for 7-string humbuckers

The Dark Wolf · 01-01-2008, 04:45 PM

Probably. Take the pole piece screws out.

Should pop right off. If it's a bit sticky afterwards, it's likely just some wax. But I doubt it will be.

scott from _actual time_ · 01-01-2008, 07:37 PM

Quote:

Originally Posted by mnemonic

i've taken the backplate off of pickups before, and it usually just slid right off. i'm sure people here have taken the backplate off of some SD's before, so was there some sort of trick to it? ....
after closer inspection, it looked like the pole pieces were screwed into the backplate. is this what is holding it in?

not on any Duncan i've seen--the threaded pole pieces are just stuck through unthreaded holes in the baseplate, not actually screwed into it.

i had the same problem with the Duncan i took apart for a magnet swap. the tall sides of the baseplate made it harder to get off. i had to unwind all the tape, and i kept gently working it backwards and forwards until it released.

other folks here have magnet-swapped in Duncans by pushing the magnet out the side with the baseplate still on. you might look into that instead.

mnemonic · 01-01-2008, 07:43 PM

haha, thanks guys. i'll give it another go next time i change strings, as it still sounds awesome right now. haha.

Quote:

Originally Posted by ibznorange

it sure would sound that way. did you try unscrewing them enough to get them out of the backplate?

nah, i didn't want to mess with them. i'm not too sure what they are screwed into, and i dont want to break anything, haha.

does anyone know if i would damage anything by unscrewing the pole pieces?

ibznorange · 01-01-2008, 07:50 PM

not at all. shit, you can even knock the slugs out of a pickup and replace em with screws, or vice versa

The Dark Wolf · 01-01-2008, 07:53 PM

Yep. I've done all that shit many times.

I've pretty much done everything to pickups short of actually rewinding them (so far.

)

ibznorange · 01-01-2008, 07:55 PM

i might try rewinding the pickups in my jbass. Timmy C from RATM/Audioslave got a set of vintage 50's jbass pickups that were messed, rewound em, and their now in his main bass. the pickups in his other basses are actually duplicates of the ones he made handwound from the fender custom shop. Id like to get into actually making pickups

mnemonic · 01-01-2008, 10:13 PM

hah, awesome.

maybe i'll slacken my strings and try it this weekend then. thanks dudes

Zepp88 · 01-01-2008, 10:44 PM

You really shouldn't need to REMOVE the baseplate

JBroll · 01-01-2008, 11:06 PM

You don't need to remove the baseplate. You can see the magnet under the coils and above the baseplate, between the lugs, and you can push it out on the side that doesn't have wires sticking out.

No unscrewing necessary.

And rewinds are really not that hard, they just take careful setup and patience.

Jeff

mnemonic · 01-01-2008, 11:29 PM

hhah, yeah i think i'm gonna try pushing it out hte side first.

will i need to repot the pickup, or will it be okay?

	sevenstring guitars		sevenstring registry		photo gallery		merch

01-01-2008, 04:45 PM	#151 (permalink)
The Dark Wolf Booze & Metal, Arrgh! • Super Moderator • Join Date: Apr 2005 Location: Toledo, Ohio. USA Posts: 16,003 Real Name: Bob Main Seven: 2001 Ibanez RG2027XVV Rig: GNX/Magicstomp Thanked: 83	Probably. Take the pole piece screws out. Should pop right off. If it's a bit sticky afterwards, it's likely just some wax. But I doubt it will be. http://www.wolf.org

01-01-2008, 07:50 PM	#154 (permalink)
ibznorange Chief Officer/RHLC © Join Date: Aug 2007 Location: AZ Posts: 7,463 Real Name: Max Main Seven: Ir now Sevenless :squint: Main ERG: A Dead Cat Rig: Mesa Rectoverb Combo Thanked: 46	not at all. shit, you can even knock the slugs out of a pickup and replace em with screws, or vice versa Reverse Headstocks or Bust Dude...i just got a spam email that was titled "Funky date rape trick" -Zepp88 I just got another funny email "Her pussy smiled at me" -Zepp88 Don't tell me you haven't heard of Raptor Jesus It's important that you know this information :headnod: It will decide your fate when we are pwned. -JoeOvChaos I was going KAT KAT KAT KAT and you were going KAT... chk... KAT... chk-die. -TomAwesome

01-01-2008, 10:44 PM	#158 (permalink)
Zepp88 4 8 15 16 23 42 Join Date: Apr 2007 Location: A Technological Deadzone Posts: 7,358 Real Name: Mike Main Seven: Schecter C7 Blackjack Main ERG: I haven't felt the need.. Rig: Mesa -> Vader Thanked: 49	You really shouldn't need to REMOVE the baseplate Withersoul - Monolithic Epic Doom Metal M.W. Tremblay.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to sevenstring.org! You are currently viewing the site as a guest which gives you limited access to most features.

Most ad placements do not show to registered members. Register Now!

01-01-2008, 07:53 PM	#155 (permalink)
The Dark Wolf Booze & Metal, Arrgh! • Super Moderator • Join Date: Apr 2005 Location: Toledo, Ohio. USA Posts: 16,003 Real Name: Bob Main Seven: 2001 Ibanez RG2027XVV Rig: GNX/Magicstomp Thanked: 83	Yep. I've done all that shit many times. I've pretty much done everything to pickups short of actually rewinding them (so far. )

01-01-2008, 07:55 PM	#156 (permalink)
ibznorange Chief Officer/RHLC © Join Date: Aug 2007 Location: AZ Posts: 7,463 Real Name: Max Main Seven: Ir now Sevenless :squint: Main ERG: A Dead Cat Rig: Mesa Rectoverb Combo Thanked: 46	i might try rewinding the pickups in my jbass. Timmy C from RATM/Audioslave got a set of vintage 50's jbass pickups that were messed, rewound em, and their now in his main bass. the pickups in his other basses are actually duplicates of the ones he made handwound from the fender custom shop. Id like to get into actually making pickups

01-01-2008, 10:13 PM	#157 (permalink)
mnemonic ss.org Regular Join Date: Sep 2006 Location: Stockton, CA Posts: 686 Real Name: Max Main Seven: Lefty Schecter 007 Elite Rig: Vox ad30 / Toneport Thanked: 4	hah, awesome. maybe i'll slacken my strings and try it this weekend then. thanks dudes

01-01-2008, 11:06 PM	#159 (permalink)
JBroll A Wookie on Ayn Rand Join Date: Mar 2007 Location: San Antonio, TX, USA Posts: 2,093 Thanked: 15	You don't need to remove the baseplate. You can see the magnet under the coils and above the baseplate, between the lugs, and you can push it out on the side that doesn't have wires sticking out. No unscrewing necessary. And rewinds are really not that hard, they just take careful setup and patience. Jeff

01-01-2008, 11:29 PM	#160 (permalink)
mnemonic ss.org Regular Join Date: Sep 2006 Location: Stockton, CA Posts: 686 Real Name: Max Main Seven: Lefty Schecter 007 Elite Rig: Vox ad30 / Toneport Thanked: 4	hhah, yeah i think i'm gonna try pushing it out hte side first. will i need to repot the pickup, or will it be okay?


	Powered by vBulletin 3.7.2 Copyright ©2000 - 2008, Jelsoft Enterprises Ltd. LinkBacks Enabled by vBSEO 3.1.0 "777" Logo © Darren Wilson Content © 2008 Sevenstring.org LLC - Privacy Policy Affiliate Links Directory

» Dealers & Group Buys

Possible New Orders of Alnico 5 and/or Alnico 8 magnets for 7-string humbuckers