I hate to bump this thread but I had to let everybody know my results from this. It's INCREDIBLY easy to do if you have previous experience working with electronics. The hardest part was putting the damn bottom screw of the output jack back in!
I didn't have much time to test it out cause it's late here and I can't have my amp cranked late at night and wake the neighbors, but just plugging in cranked for a minute or two I noticed IMMEDIATE drastic results. It sounded awesome before, but this just took the sound and made it a million times better. Tight, organic, clear and articulate with BALLS! I know what the hype is about now. To give you an idea of what the wackos at Ibanez are doing (
) I measured the resistors I pulled out with a multimeter and the resistor you replace with the 10 kohm resistor read at 98.7 kohm and the resistor you replace with the 100 ohm resistor read at 456 ohms. They're limiting a LOT of current! Anyways, if you have a TS7, DO THIS MOD RIGHT NOW!