Sevenstring.org - View Single Post - Advice: Best way to remove paint from a body

TonyFlyingSquirrel · 04-16-2007, 06:40 PM

I started with 40 grit with my orbital sander & it still took the better part of 90+ minutes to break through the various degrees of finish to get to the wood.

Short of doing lots & lots of sanding, Jasco paint stripper is the closest I've come to quickly removing paint, but make sure there's plenty of ventilation, wear oven cleaning gloves & still get used to doing a fair bit of sanding.

04-16-2007, 06:40 PM	#3
TonyFlyingSquirrel Warmoth Sales Join Date: May 2006 Location: Puyallup, Washington: www.warmoth.com Posts: 1,242 Real Name: Flying Squirrel Main Seven: IBANEZ RG7620RB Rig: L6PXTL/TFS6/RG7620RB Thanked: 35 $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$ $TonyFlyingSquirrel is rather kvlt and tr00. \m/$	I started with 40 grit with my orbital sander & it still took the better part of 90+ minutes to break through the various degrees of finish to get to the wood. Short of doing lots & lots of sanding, Jasco paint stripper is the closest I've come to quickly removing paint, but make sure there's plenty of ventilation, wear oven cleaning gloves & still get used to doing a fair bit of sanding. WWW.MYSPACE.COM/TONYFLYINGSQUIRRELMUSIC http://www.soundclick.com/bands/page...?bandID=268162 Please direct all Warmoth related inquiries directly to Warmoth, here's that link; http://www.warmoth.com/customerservice/customer.cfm