Sevenstring.org - View Single Post - Just submited a quote request to Christopher Woods.

bazguitarman · 04-10-2007, 09:58 PM

Well, I picked up on Mr. Woods from you guys and after checking his website I submited a request on a custom guitar. I`m actually very anxious to hear from him.

I speced out a neck-through Ibanez RG 7-string. Pretty simple actually.

Body: Mahogany
Neck: Mahogany
Fretboard: Ebony, no inlays, 24 stainless frets
Headstock overlay: Ebony
Body top veneer: 3/16" ebony

I asked for standard RG specs like edge radius, tummy cut, forearm cut. Also standard electronics setup with single volume, single tone, three-way blade type switch and direct mount EMG actives. Also set up with a standard Ibanez type fixed bridge. Oil finish on the entire guitar.

It should be a monster and a looker with the ebony top treatment.

Eric

04-10-2007, 09:58 PM	#1
bazguitarman Warrior Join Date: Mar 2007 Location: Tennessee, home of hillbillies and halfstacks. Posts: 168 Real Name: Eric Main Seven: Modded Ibanez RG7321 Rig: 5150 II, Boogie 4x12 Thanked: 7	Just submited a quote request to Christopher Woods. Well, I picked up on Mr. Woods from you guys and after checking his website I submited a request on a custom guitar. I`m actually very anxious to hear from him. I speced out a neck-through Ibanez RG 7-string. Pretty simple actually. Body: Mahogany Neck: Mahogany Fretboard: Ebony, no inlays, 24 stainless frets Headstock overlay: Ebony Body top veneer: 3/16" ebony I asked for standard RG specs like edge radius, tummy cut, forearm cut. Also standard electronics setup with single volume, single tone, three-way blade type switch and direct mount EMG actives. Also set up with a standard Ibanez type fixed bridge. Oil finish on the entire guitar. It should be a monster and a looker with the ebony top treatment. Eric All hail the true metal God...Jesus! Where do you think metal came from?