You have two options:
--Install an EMG in the neck. You don't need two different models, either. I know plenty of people with two 707's who are very happy.
--Install a
PA2 to boost up the output of the passive pickup to match the active one.
Quote:
|
Originally Posted by EMG FAQ
Install an EMG-PA-2 on the passive pickups. There are two benefits to doing this. With the trimpot on the PA-2, you can adjust the gain of the passive pickups to match the EMG's. The PA-2 acts as an impedance matching device so you can use the low-impedance EMG controls (25K) without affecting the tone of the passive pickups. You will also be able to use other EMG accessory circuits such as the SPC, RPC, EXB, EXG, etc. For this application, we recommend ordering the PA-2 without the switch for easy installation on the inside of a guitar.
|