View Single Post
Unread 04-02-2006, 04:54 PM   #4
David
je t'aime
 
David's Avatar
 
Join Date: Nov 2005
Location: Issaquah, WA
Posts: 4,197
Thanked: 2 / 1
David has much to be proud ofDavid has much to be proud ofDavid has much to be proud ofDavid has much to be proud ofDavid has much to be proud ofDavid has much to be proud of
Quote:
Originally Posted by Kevan
- Check for wear on the white bushings on the trem arm. Replace if necessary.

- Check to make sure the arm socket is tight. If it is not, remove the trem (pull the springs in back), and make sure the socket is threaded into the main trem plate all the way.
- Then make sure the nut used to lock the holder in place is tight. BE CAREFUL with that nut; it can be easily rounded/stripped.

Recommended: Use blue threadlocker on the threads of the parts mentioned above.
NOTE: All Ibanez stuff is Metric.
thanks kevan, I just had to replace the white bushings. I was thinking that was it, but wasn't quite sure.


Good stuff to know for the future.
David is offline   Reply With Quote