Sevenstring.org - View Single Post

supertruper1988 · 05-01-2008, 04:50 PM

So a few months ago i spotted an interesting body in Chris Woods' store. I though ok i can fix it up and for $99 its a steal

This is the body i got:

so the other day it finally showed up and i got to work on it last night.

So i started with this mess where the CNC machine messed up.

About two hours later i was down to this.
I used a file to get out most of the cuts and then i sanded it with 150 grit and then 220 to get to what you see here.

Tonight or tomorrow night i am going to sand dwon the body with 220 and 500 and route around the edges with a 1/8" round bit so that they arent so sharp.

I will update with pics as i go along.

05-01-2008, 04:50 PM	#1
supertruper1988 ss.org Regular Join Date: Nov 2006 Location: Valley of the Sun, AZ Posts: 801 Thanked: 17	Replacing the body on my 7620 (56k = lol So a few months ago i spotted an interesting body in Chris Woods' store. I though ok i can fix it up and for $99 its a steal This is the body i got: so the other day it finally showed up and i got to work on it last night. So i started with this mess where the CNC machine messed up. About two hours later i was down to this. I used a file to get out most of the cuts and then i sanded it with 150 grit and then 220 to get to what you see here. Tonight or tomorrow night i am going to sand dwon the body with 220 and 500 and route around the edges with a 1/8" round bit so that they arent so sharp. I will update with pics as i go along. __________________ Each guitarist has an evil fat 40 year old blueswankler trying to get out, If you give in to temptation you'll be sitting next to a fender playing john lee hooker while trying to keep your combover in place. - Desecrated